Articles & photos

Back

21-7-2017 1125R throttle cables xb12 charging 1190

23-8-2017 - 21-7-2017 Buell 1125R custom throttle cables, Buell XB12 2005 charging problem and stator, Buell 1190 visit :-)

new front end and high handle bar custom made by owner... — bij Twin Motorcycles Buell Support forever.

but some cables are to short now — bij Twin Motorcycles Buell Support forever.

so airbox off to get to the throttle cables — bij Twin Motorcycles Buell Support forever.

and take theme out to measure the old cables — bij Twin Motorcycles Buell Support forever.

important to know how much cable needs to stick out for the working and free play adjustment — bij Twin Motorcycles Buell Support forever.

hard part... cutting 2 perfectly good cables as i need the front and rear — bij Twin Motorcycles Buell Support forever.

the 2 housing adaptors i need — bij Twin Motorcycles Buell Support forever.

now some new outer cable :-) — bij Twin Motorcycles Buell Support forever.

and look for the right cable ends to solder on — bij Twin Motorcycles Buell Support forever.

and make a new end — bij Twin Motorcycles Buell Support forever.

everything on — bij Twin Motorcycles Buell Support forever.

now long enough :-) — bij Twin Motorcycles Buell Support forever.

testing with the lower airbox on if the throttle douse not stick — bij Twin Motorcycles Buell Support forever.

driveby.. customer came and showed his new toy... 1190 RX — bij Twin Motorcycles Buell Support forever.

nice bike nice BUELL ... — bij Twin Motorcycles Buell Support forever.

XB12 2005... HD dealer replace the stator last year... again not charging.... looking at the short to ground i have a feeling i know what is wrong.. — bij Twin Motorcycles Buell Support forever.

cover needs to come off , so oil out — bij Twin Motorcycles Buell Support forever.

shifter and clutch loose — bij Twin Motorcycles Buell Support forever.

cover bolt loose and cover off — bij Twin Motorcycles Buell Support forever.

front sprocket and rotor off ... yep... the dealer did not remove the wire bridge — bij Twin Motorcycles Buell Support forever.

seen this happen allot.. and we warn for this.. and reported this to HD technical staff many times.. there is to little play — bij Twin Motorcycles Buell Support forever.

if the cranks moves a little ( normal ) the inside nuts will knock the the wire brigde off ... with terminal failure to the stator ! by the broken off ends off the wire brigde — bij Twin Motorcycles Buell Support forever.

the wire bridge we mean — bij Twin Motorcycles Buell Support forever.

so old one off — bij Twin Motorcycles Buell Support forever.

new one , knock the rivet out and remove this piece off plastic.. — bij Twin Motorcycles Buell Support forever.

it can do with out... no issues ... new rotor on , — bij Twin Motorcycles Buell Support forever.

red loctite on the nuts — bij Twin Motorcycles Buell Support forever.

new gaskets and tighten the cover to TQ — bij Twin Motorcycles Buell Support forever.

adjusting the chain tension and clutch — bij Twin Motorcycles Buell Support forever.

and connect the 3 fase in the 4 pin plug — bij Twin Motorcycles Buell Support forever.

wires tucked in — bij Twin Motorcycles Buell Support forever.

covers back on — bij Twin Motorcycles Buell Support forever.

and testing... :-) — bij Twin Motorcycles Buell Support forever.