Articles & photos

Back

20-1-2018 Xb9 assembly and making nice for startup

2-4-2018 - What did we do today 20-1-2018 Xb9 assembly and making nice for startup

gearbox oil in and clutch cable can be mounted.. screw it in straight.. not to dammage the cable — bij Twin Motorcycles Buell Support forever.

ball and ramp adjusted cover plate on — bij Twin Motorcycles Buell Support forever.

drop red loctite on the shifter pivot bolt — bij Twin Motorcycles Buell Support forever.

ever on the shaft.. make sure you tighten this bolt..— bij Twin Motorcycles Buell Support forever.

meeehhh.. no — bij Twin Motorcycles Buell Support forever.

better.. although i know the top end will come of quick, the first shifters had a smaller peg — bij Twin Motorcycles Buell Support forever.

some moly on the clutch cabel adjuster — bij Twin Motorcycles Buell Support forever.

note the adjuster nut leaking oil throught the treads.. the nut seals this — bij Twin Motorcycles Buell Support forever.

adjusting the primairy chain — bij Twin Motorcycles Buell Support forever.

clutch cable bracket on.. — bij Twin Motorcycles Buell Support forever.

top side connecting things — bij Twin Motorcycles Buell Support forever.

hook in the throttle cables — bij Twin Motorcycles Buell Support forever.

while in the front.. remove the oil mirrors — bij Twin Motorcycles Buell Support forever.

and brake lever — bij Twin Motorcycles Buell Support forever.

clean and new silicone grease for longer lasting fun— bij Twin Motorcycles Buell Support forever.

and beutifull lever from our friends in the UK — bij Twin Motorcycles Buell Support forever. can be found HERE

front indicators need to go to — bij Twin Motorcycles Buell Support forever.

and with the 2 lower fairing crews the complete fairing comes of to replace the indicator relais — bij Twin Motorcycles Buell Support forever.

screws can be found here: 

wall-E ;-) — bij Twin Motorcycles Buell Support forever.

injectors... rear wires are green , the label is usualy unreadeble — bij Twin Motorcycles Buell Support forever.

starting to look proper — bij Twin Motorcycles Buell Support forever..

also new clutch lever — bij Twin Motorcycles Buell Support forever.

i notiched the clutch cable is rubbing the inside front leg — bij Twin Motorcycles Buell Support forever.

some new heat shrink over it for protection — bij Twin Motorcycles Buell Support forever.

and clutch lever on — bij Twin Motorcycles Buell Support forever.

CAN BE FOUND HERE

changing the indicator relais — bij Twin Motorcycles Buell Support forever.

the LED relais we sell you need to swap the feed and ground position .. easy peasy — bij Twin Motorcycles Buell Support forever.

indicator on — bij Twin Motorcycles Buell Support forever.

elbows — bij Twin Motorcycles Buell Support forever.

clutch cable adjusted.. ziptie the booth watter tight— bij Twin Motorcycles Buell Support forever.

battery charger cable — bij Twin Motorcycles Buell Support forever.

behind the right heel guard is a nice spot — bij Twin Motorcycles Buell Support forever.

tail section off to replace the rear indicators — bij Twin Motorcycles Buell Support forever.

pull the front ends out and slide to the rear — bij Twin Motorcycles Buell Support forever.

unscrew the original ones — bij Twin Motorcycles Buell Support forever.

tesing... testing .. works — bij Twin Motorcycles Buell Support forever.

last things — bij Twin Motorcycles Buell Support forever.

neutral switch has way to much resistance.. need to swap it... shop was very bussy today, so start up / finish this bike will come next week — bij Twin Motorcycles Buell Support forever.

 

.