Articles & photos

Back

27-11-2015 XB fix, XB12X customising RFID digi das

29-11-2015 - What did we do today 27-11-2015 XB get 'r running, XB12X customising RFID contact lock, digi dash

XB get 'r running, Over from Germany little help as the bike is not running.. 

XB get 'r running, i noticed ecm was not powering up correctly, but thoughing wire it did mnnnn ecm ground to the side rail was not good — bij Twin Motorcycles Buell Support forever.

XB get 'r running, ok tps set, let see what is happening... well nothing... ok spark plugs out... yep these will not work anymore — bij Twin Motorcycles Buell Support forever.

XB get 'r running, and that cable is a problem waiting to happen, will also put a new one on — bij Twin Motorcycles Buell Support forever.

XB get 'r running, rear plug same story. , fresh plugs in and she is running again , perhaps simple problems, but setting tps when it is off , is hard and can make the engine really run not good — bij Twin Motorcycles Buell Support forever.

a other 1125 rotor send in for the oiljet modification , i will remove the starter clutch for you, no problem , and return with the modified rotor, for mounting it is best to put the starter clutch on first and rotor after as the lining up aff the starter clutch bearing is tight — bijTwin Motorcycles Buell Support forever.

XB12X customising RFID contact lock, digi dash, little bracket made to mount the rfid senor — bij Twin Motorcycles Buell Support forever.

, XB12X customising RFID contact lock, digi dash, testing to check the activating height — bij Twin Motorcycles Buell Support forever.

, XB12X customising RFID contact lock, digi dash, 1 cm over the airbox cover, perfect far enough not to scratch , and close enough not to acidentaly switch it on ( refueling ) — bij Twin Motorcycles Buell Support forever.

, XB12X customising RFID contact lock. ok need to get the scedule out, as about every feed in the fuse box is spilt and, red black wire run though the fuse box and to the ignition relais... but also becomes feed to the front pilot light and tail light — bij Twin Motorcycles Buell Support forever.

, XB12X customising RFID contact lock, mnnn ok will need a 2e relais — bij Twin Motorcycles Buell Support forever.

, XB12X customising RFID contact lock, evey with the power off , the key switch relais is still activated. this will drain the battery and shorten the relais life — bijTwin Motorcycles Buell Support forever.

, XB12X customising RFID contact lock, so other feed cut and put in a relais that is switched by the rfid switch — bij Twin Motorcycles Buell Support forever.

, XB12X customising RFID contact lock, little quick testing, better, no power to the relais, but ecm / fan circuit ( fuse ) still have power — bij Twin Motorcycles Buell Support forever.

, XB12X customising RFID contact lock, next thing to get right off horn... wher eto put this one ? here is a nice place for it , but i think it will break down much to soon .., let me think about that — bij Twin Motorcycles Buell Support forever.

, XB12X customising RFID contact lock, pulled the main harness out and opened here up — bij Twin Motorcycles Buell Support forever.

, XB12X customising RFID contact lock, as i want the indicator relais also removed from the front — bij Twin Motorcycles Buell Support forever.

, XB12X customising RFID contact lock, room engough in the rear , ground is easy, switched power is easy... need to reroute 1 wire ( the signal wire from the switch ) — bij Twin Motorcycles Buell Support forever.

, XB12X customising RFID contact lock, new wire isolated and pulled to the rear — bij Twin Motorcycles Buell Support forever.

, XB12X customising RFID contact lock, check works smile-emoticon — bij Twin Motorcycles Buell Support forever.

, XB12X customising RFID contact lock, digi dash, no take a deep breath , put the phone off the hook and start cutting wink-emoticon — bij Twin Motorcycles Buell Support forever.

, XB12X customising RFID contact lock, digi dash, 3 digital thing to conect — bij Twin Motorcycles Buell Support forever.

, XB12X customising RFID contact lock, digi dash, as the don't run the same wire colors on all , but i can combine a few best to label things what they are, terminal on the wire ends in case it needs to be remove — bij Twin Motorcycles Buell Support forever.

, XB12X customising RFID contact lock, digi dash, connector on — bij Twin Motorcycles Buell Support forever.

, XB12X customising RFID contact lock, digi dash, the left overs from the original speedo connector.. battery feed, low level and engine warning light ( not sure yet how witch i will use ) or come up with a dual function for the oil pressure led ? ) — bij Twin Motorcycles Buell Support forever.

, XB12X customising RFID contact lock, digi dash, ok so far works smile-emoticon high beam flaser triger works as function switch .. check — bij Twin Motorcycles Buell Support forever.

, XB12X customising RFID contact lock, digi dash, yeah i know was 50 % change wink-emoticon — bij Twin Motorcycles Buell Support forever.

, XB12X customising RFID contact lock, digi dash, now to clean up the mess , i like the job , but so freaking time consuming not funny — bij Twin Motorcycles Buell Support forever.