Articles & photos
Back |
9-5-2018, 1125cr TLC, small check XB12Sx
11-10-2018 - What did we do Today: 9-5-2018, Buell 1125CR Tlc, small check XB12SX
on with the 1125CR running warm for oil drain — bijTwin Motorcycles Buell Support forever.
i will take off this cable :-)
and lock the throttle bodies other wise in high vacuum the butterflies will move it self
drain right — bij Twin Motorcycles Buell Support forever.
drain left carefull this come out with a flow — bij Twin Motorcycles Buell Support forever.
oil filter cover ? wtf happend here.. oil filter collapt — bij Twin Motorcycles Buell Support forever.
the top cover has come loose and oil pressure crushed it ? — bij Twin Motorcycles Buell Support forever.
it is a rotax filter — bij Twin Motorcycles Buell Support forever.
will i'm going to mount a K&N — bij Twin Motorcycles Buell Support forever.
drain plug has allot debris.. but i do not know how far this is , will clean it — bij Twin Motorcycles Buell Support forever.
and use a new washer — bij Twin Motorcycles Buell Support forever.
with a little hydroseal the plug in — bij Twin Motorcycles Buell Support forever.
losening the exhaust — bij Twin Motorcycles Buell Support forever.
the one bolt with nut — bij Twin Motorcycles Buell Support forever.
and the one bolt that needs a ball joint head — bijTwin Motorcycles Buell Support forever.
:-) new and old nut — bij Twin Motorcycles Buell Support forever.
as it is easy. now i take the oil sif cover off to check and clean — bij Twin Motorcycles Buell Support forever.
was needed , i see rotor bead and oil filter stuf — bijTwin Motorcycles Buell Support forever.
take out the siff with a needle nose , clean and push it back in — bij Twin Motorcycles Buell Support forever.
my 10 o'clock apointment checl up xb12SX — bijTwin Motorcycles Buell Support forever.
is hot already.. let it run and drain right away — bijTwin Motorcycles Buell Support forever.
right side covers of to check the belt — bij Twin Motorcycles Buell Support forever.
oil filter replacement — bij Twin Motorcycles Buell Support forever.
rear wheel loose while a 2010 model.. i still like to check it — bij Twin Motorcycles Buell Support forever.
wheel bearings ok — bij Twin Motorcycles Buell Support forever.
belt ok — bij Twin Motorcycles Buell Support forever.
wheel back in and oil in — bij Twin Motorcycles Buell Support forever.
checking the primairy chain. was a little tight — bijTwin Motorcycles Buell Support forever.
moving up .. the indicator lights need new stems — bij Twin Motorcycles Buell Support forever.
on the kellermann lights these are replaceable — bijTwin Motorcycles Buell Support forever.
old one off — bij Twin Motorcycles Buell Support forever.
and new one on.. ligt grade loctite — bij Twin Motorcycles Buell Support forever.
as it happened more.. we are going to mount riged mounts — bij Twin Motorcycles Buell Support forever.
back on and making it nice with heat shrink tube — bij Twin Motorcycles Buell Support forever.
front end check — bij Twin Motorcycles Buell Support forever.
wheel bearings are ok — bij Twin Motorcycles Buell Support forever.
brake fluid change front — bij Twin Motorcycles Buell Support forever.
and rear — bij Twin Motorcycles Buell Support forever.
letter here warm up to set the oil level, and test ride :-) — bij Twin Motorcycles Buell Support forever.
1125 Cr as we are going to mount a Superbike conversion kit.. i drain the brake and clutch fluid — bij Twin Motorcycles Buell Support forever.
and take the front wheel out — bij Twin Motorcycles Buell Support forever.
front forks out — bij Twin Motorcycles Buell Support forever.
screw that will not play nice — bij Twin Motorcycles Buell Support forever.
with my little prrr airgun helps to jolt the crew, one came loose — bij Twin Motorcycles Buell Support forever.
the lower one was also not playing — bij Twin Motorcycles Buell Support forever.
needed some more turning. and the bushing came out.. will glue this back in — bij Twin Motorcycles Buell Support forever.
front stand mounted and light added to see what i'm doing — bij Twin Motorcycles Buell Support forever.
rear o2 sensor conenctor loose — bij Twin Motorcycles Buell Support forever.
engine bolts out — bij Twin Motorcycles Buell Support forever.
ignition cover plug out to rotate the engine — bijTwin Motorcycles Buell Support forever.
engine down — bij Twin Motorcycles Buell Support forever.
mnnn coil connector lock tab is broken of.. — bijTwin Motorcycles Buell Support forever.
rusty coil > — bij Twin Motorcycles Buell Support forever.
plug is also rusty.. strange ? very hard to get to this— bij Twin Motorcycles Buell Support forever.
anyway cover of — bij Twin Motorcycles Buell Support forever.
an check the valve lash — bij Twin Motorcycles Buell Support forever.
exhaus cam looks not ok.. wear sould not be seen— bij Twin Motorcycles Buell Support forever.
ok.. something is not ok.. ... 0.50 mm / .020 inch that is way to much — bij Twin Motorcycles Buell Support forever.
not happy with the valve fingers.. as it looks the cams have grinded a detent in theme — bij Twin Motorcycles Buell Support forever.
has a use one to see.. flat and curve one line — bijTwin Motorcycles Buell Support forever.
these look worn in .. very bad things can happen here when these fingers break — bij Twin Motorcycles Buell Support forever.