Articles & photos

Back

8-3-2018 RS1200 inspection, XB12Scg service

9-6-2018 - What did we do today: 8-3-2018 Buell RS1200 inspection, Buell XB12Scg service, Buell XB12S trouble shooting

RS1200... old Xl engine.. so old oil pump — bij Twin Motorcycles Buell Support forever. THIS BIKE IS FOR SALE TOO LOOK HERE https://www.twinmotorcycles.nl/webshop/artikel.asp?mc=1&aid=5300&cid=233&s=&a=&aname=Buell_RS1200 and is fully serviced. The buyer didn't show up so for sale again.

as the drain plug on these is a crime.. easy to take off the feed hose on the pump — bij Twin Motorcycles Buell Support forever.

oil tank drain plug... over the swingarm. and close to the tyre — bij Twin Motorcycles Buell Support forever.

removing the supertrapp .. with the make it fit dents in it — bij Twin Motorcycles Buell Support forever.

bike lifted in the hoist.. and removing the rear shock— bij Twin Motorcycles Buell Support forever.

to drain the engine case — bij Twin Motorcycles Buell Support forever.

old brake stuf — bij Twin Motorcycles Buell Support forever.

jus trying to bleed it .. nothing — bij Twin Motorcycles Buell Support forever.

mnn ok i remenber .. bike came with a new master , because the old one was broken — bij Twin Motorcycles Buell Support forever.

so draining ( or sucking ) the reservoir — bij Twin Motorcycles Buell Support forever.

banjo bolt metric... — bij Twin Motorcycles Buell Support forever.

the old fluid is lumpy :-( — bij Twin Motorcycles Buell Support forever.

and with 2 bolt the cylinder is removed — bij Twin Motorcycles Buell Support forever.

the lever sytem needs to put on the new master — bij Twin Motorcycles Buell Support forever.

little lube and the lever mounted on the new cylinder— bij Twin Motorcycles Buell Support forever.

reservoir hose back on — bij Twin Motorcycles Buell Support forever.

and fluid in trying to bleed again.. no luck so far.. there is fluid motion bu no pressure... i think the gambler rear caliper needs some attention to — bij Twin Motorcycles Buell Support forever.

for now shock back on.. — bij Twin Motorcycles Buell Support forever.

next.. nice SCG .. in for big check up and wheel coating / new covers — bij Twin Motorcycles Buell Support forever.

will sort the screws out when i mount theme — bij Twin Motorcycles Buell Support forever.

checking if the bike is charging, as the battery was flat ( could be very well the alarm that is mounted )— bij Twin Motorcycles Buell Support forever.

drain while warm — bij Twin Motorcycles Buell Support forever.

mnn the adjuster was out.. but the jam nut not tightened.. — bij Twin Motorcycles Buell Support forever.

rear brake removed as the wheel needs to come out— bij Twin Motorcycles Buell Support forever.

front plug taken out — bij Twin Motorcycles Buell Support forever.

gearbox fuild back in — bij Twin Motorcycles Buell Support forever.

adjusting the primairy chain tension ( to loose ) — bijTwin Motorcycles Buell Support forever.

new front plug in — bij Twin Motorcycles Buell Support forever.

and adding the enigne oil — bij Twin Motorcycles Buell Support forever.

rear wheel out.. needs to be coated Black — bij Twin Motorcycles Buell Support forever.

and temp wheel in so we can move the bike — bij Twin Motorcycles Buell Support forever.

airbox cover.. smart move with the kydex pieces — bij Twin Motorcycles Buell Support forever.

mnn wires look pinched — bij Twin Motorcycles Buell Support forever.

eehhh... — bij Twin Motorcycles Buell Support forever.

no connectors , how do i get this off the fastest way— bij Twin Motorcycles Buell Support forever.

need to look closer to these wires — bij Twin Motorcycles Buell Support forever.

air filter will replace with K&n one — bij Twin Motorcycles Buell Support forever.

plug cables.. pull the connector forward.. to make good contact — bij Twin Motorcycles Buell Support forever.

front end check — bij Twin Motorcycles Buell Support forever.

front end check — bij Twin Motorcycles Buell Support forever.

first time the front fork comes out.. bolts are tight with loctite — bij Twin Motorcycles Buell Support forever.

protect the cap — bij Twin Motorcycles Buell Support forever.

and cleaning the legs before we take theme apart — bij Twin Motorcycles Buell Support forever.

fresh oil in and putting theme to getter — bij Twin Motorcycles Buell Support forever.

front wheel also a temp wheel in — bij Twin Motorcycles Buell Support forever.

air filter base plate back on — bij Twin Motorcycles Buell Support forever.

bar end plugs out — bij Twin Motorcycles Buell Support forever.

as new ones with mirror need to be mounted — bij Twin Motorcycles Buell Support forever.

removing the old mirror stuf — bij Twin Motorcycles Buell Support forever.

with a mirror hole plug , looks nicer — bij Twin Motorcycles Buell Support forever.

throttle side , if i ,ount the mirror like this.. the throttle will bind — bij Twin Motorcycles Buell Support forever.

useing a spacer to keep the mirror off the grip — bij Twin Motorcycles Buell Support forever.

flyscreen cover off — bij Twin Motorcycles Buell Support forever.

and removing the red indicators — bij Twin Motorcycles Buell Support forever.

replacing them for black ones — bij Twin Motorcycles Buell Support forever.

nice — bij Twin Motorcycles Buell Support forever.

ok done for now.. need to wait on the wheel , — bij Twin Motorcycles Buell Support forever.

prepping the wheels for powder coating.. removing the pulley — bij Twin Motorcycles Buell Support forever.

prepping the wheels for powder coating.. removing the pulley — bij Twin Motorcycles Buell Support forever.

tyre comes off — bij Twin Motorcycles Buell Support forever.

and unscrew the valve — bij Twin Motorcycles Buell Support forever.

same with the front one , and removing the wheel bearings — bij Twin Motorcycles Buell Support forever.

trouble shooting our.. problem child.. — bij Twin Motorcycles Buell Support forever.

i want to checl the resitance on the neutral switch , as this is a ground signal to the ecm — bij Twin Motorcycles Buell Support forever.

this is ok.. — bij Twin Motorcycles Buell Support forever.

plugs out.. and checking compression — bij Twin Motorcycles Buell Support forever.

before you turn over the engine.. remove the coil plug — bij Twin Motorcycles Buell Support forever.

and the fuel pump connector — bij Twin Motorcycles Buell Support forever.

open the throttle full , and hit the starter button, to turn over the engine — bij Twin Motorcycles Buell Support forever.

count the rotations.. about 5 to 6 and the the pressure sould reach it max ( cold engine ) 150 psi rear one — bij Twin Motorcycles Buell Support forever.

checking the front — bij Twin Motorcycles Buell Support forever.

also good .. — bij Twin Motorcycles Buell Support forever.

plugs back in anc checking again.. trying to see the duty cycle , see if we can see a diferance in the front and rear coil — bij Twin Motorcycles Buell Support forever.

when the bike was running.. .. i noticed the fan turning on.. and the light flickered.. mnnnn ok regulator broken ? no charge tight now — bij Twin Motorcycles Buell Support forever.

tried again , start.. and now it douse charge... bad regulator the problem ? — bij Twin Motorcycles Buell Support forever.

stator is good — bij Twin Motorcycles Buell Support forever.

connections ok — bij Twin Motorcycles Buell Support forever.

old vr..cracked on the back — bij Twin Motorcycles Buell Support forever.

new regulator on — bij Twin Motorcycles Buell Support forever.

ccables connected — bij Twin Motorcycles Buell Support forever.

and lets try... healthy charge.. and so far so good.. the front cylinder keept fireing even when hot... this calls for a test ride :-) — bij Twin Motorcycles Buell Support forever.