Articles & photos

Back

7-7-2017 XB12X service, XB noise, X1 Fuel,1125

17-8-2017 - What did we do today: 7-7-2017 Buell XB12X making here run nice, Buell XB making noise , Buell X1 fuel pump, Buell 1125 charging issues

uly in for check.. as she is running lean, very hot ( fan is about always on ) and stutter 3000-3500 rpm— bij Twin Motorcycles Buell Support forever.

right scoop removed for intake seal check — bij Twin Motorcycles Buell Support forever.

ulys come with a very handy computer tray — bij Twin Motorcycles Buell Support forever.

ok little 1 on 1 buell diagnistics ... tps is low 4,8 — bijTwin Motorcycles Buell Support forever.

idle is high — bij Twin Motorcycles Buell Support forever.

more than 1100 rpm and not steady.. and AFV is 113 , given the fact customer complains 3000-3500 stumbels , i don't need to check.. intake seals are bad ... — bij Twin Motorcycles Buell Support forever.

as the stock exhaust as jack points we do not have to remove this — bij Twin Motorcycles Buell Support forever.

will need to fix the clutch cable — bij Twin Motorcycles Buell Support forever.

engine supported, and front mount bolt removed — bij Twin Motorcycles Buell Support forever.

covers off and w-brace out — bij Twin Motorcycles Buell Support forever.

exhaust valve opened in a quick and dirty way — bij Twin Motorcycles Buell Support forever.

stock airfilter.. really after 35000 km — bij Twin Motorcycles Buell Support forever.

stock filter and holes drilled... ? — bij Twin Motorcycles Buell Support forever.

any way.. see the signs off a coughing engine — bij Twin Motorcycles Buell Support forever.

aitbox off, and throttle bodie connections removed — bij Twin Motorcycles Buell Support forever.

engine down — bij Twin Motorcycles Buell Support forever.

cut off 1/4 allen very handy :-) — bij Twin Motorcycles Buell Support forever.

other side... looks like the spark wire is rubbing. customer told me the bike was running on 1 cylinder in the rain, this surtenly is a reason — bij Twin Motorcycles Buell Support forever.

other side... looks like the spark wire is rubbing. customer told me the bike was running on 1 cylinder in the rain, this surtenly is a reason — bij Twin Motorcycles Buell Support forever.

intake off.. clearly visible leaking gaskets — bij Twin Motorcycles Buell Support forever.

will put on a port cap to .. — bij Twin Motorcycles Buell Support forever.

little cleaning and new shink tube for the idle adjuster cable — bij Twin Motorcycles Buell Support forever.

vacuum port cap — bij Twin Motorcycles Buell Support forever.

and intake back on — bij Twin Motorcycles Buell Support forever.

no is good time to check / replace the plugs — bij Twin Motorcycles Buell Support forever.

very white off the lean burn — bij Twin Motorcycles Buell Support forever.

new ones in — bij Twin Motorcycles Buell Support forever.

point the spark plug cables in , so they will not rub against the wire loom — bij Twin Motorcycles Buell Support forever.

always stinging in you fingers... frayed throttle cables— bij Twin Motorcycles Buell Support forever.

just hanging on 1 cable — bij Twin Motorcycles Buell Support forever.

fly screen off, and pulled the cable out — bij Twin Motorcycles Buell Support forever.

easy to push it back in — bij Twin Motorcycles Buell Support forever.

routed and in postion — bij Twin Motorcycles Buell Support forever.

engine up and tq the front mount — bij Twin Motorcycles Buell Support forever.

new boot for the clutch cable — bij Twin Motorcycles Buell Support forever.

now is easy to lube the adjuster for the long run — bij Twin Motorcycles Buell Support forever.

and new bracket on, so the cable douse not burn again — bij Twin Motorcycles Buell Support forever.

connections back on — bij Twin Motorcycles Buell Support forever.

tps reset — bij Twin Motorcycles Buell Support forever.

you can now visualy check the butterly is closed — bij Twin Motorcycles Buell Support forever.

airbox and K&n filter on — bij Twin Motorcycles Buell Support forever.

top of the box back on — bij Twin Motorcycles Buell Support forever.

and something to make it nice — bij Twin Motorcycles Buell Support forever.

right side scoop... 
will give enough additional cooling — bij Twin Motorcycles Buell Support forever.

XB12SS is not running like it should — bij Twin Motorcycles Buell Support forever.

mnnn front bolt exhaust mount is out — bij Twin Motorcycles Buell Support forever.

oo crap... was loose way to long.. as the exhaust broke... needed to call the customer — bij Twin Motorcycles Buell Support forever.

1125CR battery fused kept popping on holiday — bij Twin Motorcycles Buell Support forever.

with the regulator disconnected the fuse did not pop— bij Twin Motorcycles Buell Support forever.

strange sticky fluid did come out the regulator — bij Twin Motorcycles Buell Support forever.

first check .. stator to ground... no.. all good — bij Twin Motorcycles Buell Support forever.

than Voltage AC check.. 22 volts AC , that is good — bij Twin Motorcycles Buell Support forever.

so new regulator — bij Twin Motorcycles Buell Support forever.

and charging 14+ volts right away — bij Twin Motorcycles Buell Support forever.

so old one out.. — bij Twin Motorcycles Buell Support forever.

if you remove the undertry screw ans push this to the side the regualtor can be take out easy — bij Twin Motorcycles Buell Support forever.

mnn strange burn marks — bij Twin Motorcycles Buell Support forever.

not seen this before ? — bij Twin Motorcycles Buell Support forever.

Buell X1 you know spark plugs are perfect seals plug for 3/8 hose ;-) — bij Twin Motorcycles Buell Support forever.

we need to remove the ring to get to the fuel pump out — bij Twin Motorcycles Buell Support forever.

with the ring removed, you can put your arm in — bij Twin Motorcycles Buell Support forever.

the 2 fittinges needs to loosen — bij Twin Motorcycles Buell Support forever.

pressing the wires out — bij Twin Motorcycles Buell Support forever.

out is easy — bij Twin Motorcycles Buell Support forever.

ok new seal needed ( included ) — bij Twin Motorcycles Buell Support forever.

fuel pressure ;-) o-rings are loose the fuel will blow out the o-rings — bij Twin Motorcycles Buell Support forever.

the inner o-ring is even very hard to get — bij Twin Motorcycles Buell Support forever.

new pressure valve with new seals in — bij Twin Motorcycles Buell Support forever.

and new rubber seals — bij Twin Motorcycles Buell Support forever.

hand back in ti position the fuel pump correctly — bij Twin Motorcycles Buell Support forever.

and tightened — bij Twin Motorcycles Buell Support forever.

hehe... she is holdding pressure — bij Twin Motorcycles Buell Support forever.

and push off the bottum and she is running — bij Twin Motorcycles Buell Support forever.

even after 2 minuts pressure off — bij Twin Motorcycles Buell Support forever.

the cap back on the fuel pressure test port — bij Twin Motorcycles Buell Support forever.

and intake back on — bij Twin Motorcycles Buell Support forever.

customer called, she wants new exhaust in black — bij Twin Motorcycles Buell Support forever.

grrrr. could not reach all... — bij Twin Motorcycles Buell Support forever.

needed to remove the belt tension — bij Twin Motorcycles Buell Support forever.

to remove the brace ans emptu gemaakt — bij Twin Motorcycles Buell Support forever.

dome force is needed — bij Twin Motorcycles Buell Support forever.

exhaust off.. and in the old iron — bij Twin Motorcycles Buell Support forever.