Articles & photos
Back |
6-9-2014 1125 burned Stator modification, Rear tyr
9-9-2014 - Buell 1125 R a very nice one in for stator modification. Buell Xb12XT rear tyre change.
Buell 1125 R a very nice one in for stator modification, warning light did burn already a few times.
Buell 1125 R, just some more pictures because i really like this bike.
Buell 1125 R, home made Exhaust modification to the Stock exhaust,.
Buell 1125 R, the Ilmberger fairing is rally a nice one.
Buell 1125 R, ok enough droweling... lower fairing off, and checking for error codes.
Buell 1125 R, checking the stator for short to ground, and between each other, all measure good.
Buell 1125 R, ok , AC voltage check, mnn 2 volts on one fase.
Buell 1125 R, the others look ok, so stator will be replaced to.
Buell 1125 R, airbox off and connector plug removed.
Buell 1125 R, with only 8000 km , i can see the stator is been replaced already ( cable was put in with a short cut )
Buell 1125 R, oil line clipped out, and cover screws off.
Buell 1125 R, yep cover has been of ones before the little seal screw is on the wrong position.
Buell 1125 R, cover off, not really super crispy yet, let say just in time to replace it Our new stator can be found here: https://www.twinmotorcycles.nl/webshop/artikel.asp?guid=YXHFSC&aid=5768&cid=0&s=stator&a&aname=New_Buell_1125R_and_1125CR_2009-2010_stator
Buell 1125 R, hot metal clutch sprag screws out and rotor nut off. Our new rotor can be found here: https://www.twinmotorcycles.nl/webshop/artikel.asp?guid=YXHFSC&aid=5318&cid=0&s=1125Rotoroiljet&a&aname=Buell_1125RCR_Rotor_upgrade_with_oil_jet_
Buell 1125 R, hot metal ( customer came in from belgium ) Our new rotor can be found here: https://www.twinmotorcycles.nl/webshop/artikel.asp?guid=YXHFSC&aid=5318&cid=0&s=1125Rotoroiljet&a&aname=Buell_1125RCR_Rotor_upgrade_with_oil_jet_
Buell 1125 R, i really like to clean out the old loctide, as i want these screws never to come out, M8 treath.
Buell 1125 R, also clean the bolts with a threat chaser.
Buell 1125 R, after cleaning some oil on the starter clutch rolls before putting it back, running these dry will damage the surface and destroy the starter clutch.
Buell 1125 R, i like to put the gear and the starter clutch back on first.
Buell 1125 R, and than put on the rotor, turn the starter clutch to line up the holes Our new rotor can be found here: https://www.twinmotorcycles.nl/webshop/artikel.asp?guid=YXHFSC&aid=5318&cid=0&s=1125Rotoroiljet&a&aname=Buell_1125RCR_Rotor_upgrade_with_oil_jet_
Buell 1125 R, and put the screw on, and rotor nut loctide and tq theme down Our new rotor can be found here: https://www.twinmotorcycles.nl/webshop/artikel.asp?guid=YXHFSC&aid=5318&cid=0&s=1125Rotoroiljet&a&aname=Buell_1125RCR_Rotor_upgrade_with_oil_jet_
Buell 1125 R, cleaning out the cover , and aply some more silicone to protect the cables for rubbing.
Buell 1125 R, new stator in and harness protection plate back on place Our new stator can be found here:https://www.twinmotorcycles.nl/webshop/artikel.asp?guid=YXHFSC&aid=5768&cid=0&s=stator&a&aname=New_Buell_1125R_and_1125CR_2009-2010_stator
Buell 1125 R, little silicone around the rubber plug to make it seal good , and cover back on Our new stator can be found here: https://www.twinmotorcycles.nl/webshop/artikel.asp?guid=YXHFSC&aid=5768&cid=0&s=stator&a&aname=New_Buell_1125R_and_1125CR_2009-2010_stator
Buell 1125 R, running the stator leas back up , and putting some intake stacks on, for just a little more push You can buy the intake stacks here: https://www.twinmotorcycles.nl/webshop/artikel.asp?guid=YXHFSC&aid=3005&cid=0&s=TM1125intakestack&a&aname=Buell_1125_Performance_Intake_stack
Buell 1125 R, removing the HD modification.. o the bike will charge low rpms.
Buell 1125 R, AC voltage check... nice 24 volt at idle on all 3 fases.
Buell 1125 R, now the customer called what to do, not wanting to risk getting stranded the way over to us, with a drained battery, the headlights bulbs connectors where removed , so i will put theme back in.. pulling the indicator wires.
Buell 1125 R, and removing the mirror nuts.
Buell 1125 R, easy pull theme out not pulling to hard on the indicator wires , and the 2 side screws , and the front fairing is off.
Buell 1125 R, 6 bolts to remove the headlight unit.
Buell 1125 R, to get to the plugs...connect and put all parts back, no troubles with the charging system anymore.
Buell Xb12XT rear tyre change.
Buell Xb12XT rear tyre change , rear brake caliper off.
Buell Xb12XT rear tyre change, pinch bolt loose.
Buell Xb12XT rear tyre change , and axle out , belt cover removed.
Buell Xb12XT rear tyre change , corroded axle.. notice with loosening the axle the axle comes out, if it is frozen on the wheel bearings, turning it furter will spread the swingarm with a change off breaking the welds in the oil tank.
Buell Xb12XT rear tyre change , clean and lube.
Buell Xb12XT rear tyre change , and tighten the axle, and the pinch bolt again.
Buell Xb12XT rear tyre change , nice and fat look ( 190 tyre was mounted ) off course calls for a test ride rubbing in the tyre for the customer a service we really like.