Articles & photos

Back

9-7-2015 Uly Love part 2, rear tyre XB Front fork

10-7-2015 - What did we do today 9-7-2015 Uly Love part 2, rear tyre XB , Front fork damage repair

Uly Love part 2, front end back in 

Uly Love part 2, TQ the axle down, so the pinch bolts after you pressed the suspention a few time to set the front forks

Uly Love part 2, while checking the electrics , the indicators did not work, and the tail light...mnn fuse popped

Uly Love part 2, as the fuse seams to pop when the indicators start working... with the wires off nothing wrong.

Uly Love part 2, noticed a other nick in the wire loom , will repair and isolate this 

Uly Love part 2, new indicator mounted, and wired up, no more fused popping, i think the indicator innerts is shorting out on the old one

Uly Love part 2, covers bak con

Uly Love part 2, daily uly riders get a free check up on the grond points smile-emoticon all ok on this bike

Uly Love part 2, fresh Brake fluid, do down hill from the mountains the bike will still brake

Uly Love part 2, off course don't forget the rear ... time for a test ride smile-emoticon

Xb old belt tyre change, the covers can be a handfull . but if you unscrew the lower guard

\

Xb old belt tyre change, and take the axle out and brake caliper off, and lift the bike some more , you can roll the wheel out , with out nicking or manhandeling the fragile belt

Xb old belt tyre change, with fresh tyre on, back in the same way

Xb old belt tyre change, and put never seas on these little cover screws

XB front leg damage repair, justalittle bend.. will not buff out

XB front leg damage repair, as the leg is not longer able to colaps , removing the cap with damper complete is a sueteble option , remove the spring clip on the bluepart ( rebound needle holder )

XB front leg damage repair, and turn off the suspention preload, so the pretension is off

XB front leg damage repair, loosen the banjo bolt in the lower leg holding the damer rod assembly

XB front leg damage repair, after removing this banjo bolt , remove the c-clip on the oil seals

XB front leg damage repair and you can, pull the front leg apart 

XB front leg damage repair, the new lower leg somes with seals and busings , demening rod needs to be reused, off course check for warps and workings , needle rod and damper are good to go

XB front leg damage repair, so with a new crush rings the damper can be mounted back to getter 

XB front leg damage repair, seals hammered in

XB front leg damage repair, oil andpsring back in and preload tube

XB front leg damage repair., cap back on and turn on the spring preload adjuster, and put back the limiter c-clip back on

XB front leg damage repair, putting back the legs should slide in the holes easy ( indication every thing is inline ) mind the handle bar switch wires so they do not get pinched against the handle bar

XB front leg damage repair, axle checked for staightness , and front wheel back in 

XB front leg damage repair, foot peg replacement, remove the c-clip and take the pivot pin out, can help to use a drift

XB front leg damage repair, stong thumb and pus the spring in the peg while pusing in the pin

XB front leg damage repair, line the pine up some , and a tap with a hammer drives it home , and put the c-clip back on

XB front leg damage repair, nice new paint... still will use etching primer for the new frame puck