Articles & photos

Back

13-7-2017 Xr1200 mods . X1 dyno prep

23-8-2017 - What did we do today: 13-7-2017 XR1200 mods Buell X1 dyno prep

Chopper XR ? high risers and highway pegs .. time for other front end.. — bij Twin Motorcycles Buell Support forever.

front needs to come off as we change the triple T and the brake line , so to drain the system — bij Twin Motorcycles Buell Support forever.

and remove the calipers — bij Twin Motorcycles Buell Support forever.

front wheel axle nut loose and remove the axle — bijTwin Motorcycles Buell Support forever.

the front wheel spacers are the same.. in case you wonder — bij Twin Motorcycles Buell Support forever.

and loosening the front legs — bij Twin Motorcycles Buell Support forever.

front legs out and losening the brake hose , stainless steel set will be mounted back — bij Twin Motorcycles Buell Support forever.

hand guards../ never seen these on a XR before — bij Twin Motorcycles Buell Support forever.

starting to stip the triple t , head light off — bij Twin Motorcycles Buell Support forever.

clutch cable off — bij Twin Motorcycles Buell Support forever.

and handle bar switch out — bij Twin Motorcycles Buell Support forever.

removing the tank cover — bij Twin Motorcycles Buell Support forever.

loosen the feed quick connector and the fuel pump connector — bij Twin Motorcycles Buell Support forever.

with the fuel tank out the way.. disconnect the connectors from the stuff we need to remove — bij Twin Motorcycles Buell Support forever.

and dash off — bij Twin Motorcycles Buell Support forever.

loosening the old throttle cables — bij Twin Motorcycles Buell Support forever.

and cutting connections under the frame — bij Twin Motorcycles Buell Support forever.

handle bar switch connectors loose — bij Twin Motorcycles Buell Support forever.

and top plate can be removed — bij Twin Motorcycles Buell Support forever.

mnn steering lock has been dinged up , needed to file it flat to reuse the bearings — bij Twin Motorcycles Buell Support forever.

triple t in place — bij Twin Motorcycles Buell Support forever.

starting to rebuild it .. forks in — bij Twin Motorcycles Buell Support forever.

mounting back come very handy brackets , to guide cables — bij Twin Motorcycles Buell Support forever.

adjusting the angle off the bars — bij Twin Motorcycles Buell Support forever.

headlight back in — bij Twin Motorcycles Buell Support forever.

and mounted — bij Twin Motorcycles Buell Support forever.

front wheel back on — bij Twin Motorcycles Buell Support forever.

and mounting the brakes — bij Twin Motorcycles Buell Support forever.

throttle grip back on — bij Twin Motorcycles Buell Support forever.

startting to looke like somethings — bij Twin Motorcycles Buell Support forever.

new brake line on.. an screw every thing on — bij Twin Motorcycles Buell Support forever.

Throttlecables routed

checking all cables

New Brake fluid in

stainless brake line.. we can still get these ;- ) and bleeding the system — bij Twin Motorcycles Buell Support forever.

new look.. — bij Twin Motorcycles Buell Support forever.

nice — bij Twin Motorcycles Buell Support forever.

X1 making ready for dyno to morrow — bij Twin Motorcycles Buell Support forever.