Articles & photos
| Back |
14-11-15 XB oil spil, 1125 Brake disc, fuelpump
17-11-2015 - What did we do Today: 14-11-15 XB oil spil, brake disk 1125 , fuel pump check, xb engine case
XB oil spil, nice Xb new customer , had the service done at the a HD dealer 300 km ago
XB oil spil,, but when ever the engine gets warm it is leaking oil... bad as the rear tyres is coated — bij Twin Motorcycles Buell Support forever.
XB oil spil, chin spoiler inside very greasy — bij Twin Motorcycles Buell Support forever.
XB oil spil, looks like it is coming from the oil filter , but hard to tell now — bij Twin Motorcycles Buell Support forever.
XB oil spil, so after a little cleaning , let here run to check for leaks — bij Twin Motorcycles Buell Support forever.
XB oil spil, oil did seap out between the filter and the engine case... after removal see the small knick in the rubber.. just engough to make it leak — bij Twin Motorcycles Buell Support forever.
XB oil spil, easy fix, new filter — bij Twin Motorcycles Buell Support forever.
XB oil spil, of course checking your work — bij Twin Motorcycles Buell Support forever.
XB oil spil, noticed the right foot peg plate was loose. really loose :-X — bij Twin Motorcycles Buell Support forever.
XB oil spil, something you do not want to loose, footpegs is one off theme, bolts back in with locktite — bij Twin Motorcycles Buell Support forever.
XB oil spil, customer asked also to put a right side airscoop in... i noticed the lower thread rivet was a littel dammaged , so before i screw back in the bolt, i retap it holded the rivet from turning with a pair off pliers — bij Twin Motorcycles Buell Support forever.
XB oil spil, inner and outer scoop on, neverseas on the litte screws — bij Twin Motorcycles Buell Support forever.
fuel pump check... made a little set up to check the fuel pump — bij Twin Motorcycles Buell Support forever.
with the new seal, no more leaking and a healty pressure reading... she is good to be shipped back to the customer — bij Twin Motorcycles Buell Support forever.
1125CR brake disk, nice colour combination
1125CR brake disk, the front end is vibrating when you brake, 99% disk is warped , try and check with some sharpy markings — bij Twin Motorcycles Buell Support forever.
1125CR brake disk, and when you spin the wheel apply the brake lightly... you will see exactly what is going on— bij Twin Motorcycles Buell Support forever.
1125CR brake disk, loosen the pad pins before you take off the caliper — bij Twin Motorcycles Buell Support forever.
1125CR brake disk, front wheel out and ready to remove the disk — bij Twin Motorcycles Buell Support forever.
1125CR brake disk, nice and new brake disk back on... little loctite and torq down the bolt to 35 NM. Brake disc can be found here: https://www.twinmotorcycles.nl/webshop/artikel.asp?guid=YXHFSC&aid=3356&cid=10057&s&a&aname=Buell_XB_1125_FRONT_brake_disc_with_TUV — bijTwin Motorcycles Buell Support forever.
1125CR brake disk, new disk , new pads, and the old ones did not have to much life in theme. pads can be found here: https://www.twinmotorcycles.nl/webshop/artikel.asp?guid=YXHFSC&aid=2407&cid=10057&s&a&aname=Buell_Front_brake_pads_1125__XB_ZTL2__8_pods — bij Twin Motorcycles Buell Support forever.
1125CR brake disk, whee back on , caliper with new pads on.. .now to brake in the front brake Brake disc can be found here: https://www.twinmotorcycles.nl/webshop/artikel.asp?guid=YXHFSC&aid=3356&cid=10057&s&a&aname=Buell_XB_1125_FRONT_brake_disc_with_TUV — bijTwin Motorcycles Buell Support forever.
XB engine case, the crank was already send to us by the customer, but after inspecting we really wanted the case to, as it is useless to make the crank perfect to put in back in a case where the crank bearings are shot and been wearing out off line — bij Twin Motorcycles Buell Support forever.
XB engine case, for these kind off jobs the less stuff is on the engine the better you can clean it — bij Twin Motorcycles Buell Support forever.
XB engine case, so stator out — bij Twin Motorcycles Buell Support forever.
XB engine case, left bearing spacer out — bij Twin Motorcycles Buell Support forever.
XB engine case, and crank seal out — bij Twin Motorcycles Buell Support forever.
XB engine case, loosening the case bolts — bij Twin Motorcycles Buell Support forever.
XB engine case, and remove the lifters.. i mark these— bij Twin Motorcycles Buell Support forever.
XB engine case, always a big debated... where douse the feed hole go, in our out smile-emoticon — bij Twin Motorcycles Buell Support forever.
XB engine case, you see where the crank has been rubbing on the case inside — bij Twin Motorcycles Buell Support forever.
XB engine case, as sizing and lapping the new crank bearing the cases will be take apart a few times, and this wil work so much easyer with out the gearbox, so take the gearbox out, with a drift tap out the shifter fork axles — bij Twin Motorcycles Buell Support forever.
XB engine case, slide the axle a little out the case hole, and pull out the shifter forks out the drum — bijTwin Motorcycles Buell Support forever.
XB engine case, do this also for the lower shifter fork.. and you can pull ou the drum — bij Twin Motorcycles Buell Support forever.
XB engine case, little check you can do on the old model forks... douse the steel drum follower is free rotating ? — bij Twin Motorcycles Buell Support forever.
XB engine case, bushing did not come out, but i ziptie these ,just in case they come loose during transport — bij Twin Motorcycles Buell Support forever.
XB engine case, do this also for the maindrive gear so it will not fall off — bij Twin Motorcycles Buell Support forever.
XB engine case, counter shift locking plate, normaly you do this in a much earlier stadium, as there is no way to lock the axle now, but with a little purrr from the airwrench it also comes loose — bij Twin Motorcycles Buell Support forever.
XB engine case, gearbox pressed out, and ready to be shipped to the machine shop , to put the crank in straight ( new case bearings ) — bij Twin Motorcycles Buell Support forever.
