495 products found. Go to page:
|
|
|
 | | | K&N Airfilter recharge Oil 1 gallon | €42,00 Add to cart | | K&N Air Filter Oilis the only oil specially formulated to work in combination with the cotton fabric in K&N Filterchargerelements providing a superior air filtration system. When used as directed, it quickly penetrates the filter pleats, where it remains suspended in the cotton fabric.
1 Gallon bottle
K&N... | |
|
|
|
 | | | Torque Hammer XB9/12 spoiler bracket long right | On request | | please order replacement bracket TM641009
Twin Motorcycles Torque Hammer Buell XB chin spoiler bracket long right side.
Twin Motorcycles made a Spoiler bracket for our Torque Hammer exhaust that exist out of 3 pieces. 1 left piece and 2 right pieces. This can be used for any exhaust system.
The 3 part numbers for t... | |
|
|
|
 | | | TQ hammer XB, spoiler bracket small right side | On request | | please order TM641010
Twin Motorcycles Torque Hammer XB, spoiler bracket small right side.
Twin Motorcycles made a Spoiler bracket for our Torque Hammer exhaust that exist out of 3 pieces. 1 left piece and 2 left pieces. This can be used for any exhaust system.
The 3 part numbers for the complete chin spoiler k... | |
|
|
|
 | | |
|
|
 | | |
|
|
 | | | Buell 1125R 1125CR Clutch Slave Cylinders | €219,00 Add to cart | | Buell 1125R and 1125CR aftermarket Clutch Slave Cylinders with lifetime warranty.Fits all Buell 1125R and 1125CR models from 2008-2010 and EBR models
the slave cylinder comes complete with crush washers for the hydraulic line , al you need exstra is brake fluid
Replacement clutch slave cylinder for the Buell 1125R and... | |
|
|
|
 | | | Buell S3 S3T and X1 Fuel Pump 1999-2002 | On request | | Buell X1S3 S3T complete fuel pump sytem.Fits all: 1999-2000-2001-2002 Buell X1 S3 S3T models.OEM limited supply
replaces partnumbers;
62199-99Y , 62199-99YA, 62199-99YB
P0130.KC P131.K
| |
|
|
|
 | | | Buell 1125 R/CR High performance clutch kit | €299,00 Add to cart | | Buell 1125R and 1125CR 2008-2010 all models.High performance clutch kit. This kit consists of 9 friction plates, 10 steel plates, set off 6 x heavy duty springs. The Clutch springs are shorter than Original but 12% stonger at working height, installation and torque spec's are the same asstock.
For a good working of t... | |
|
|
|
 | | | Buell and Sportster TM New Style Intake Flange | €105,00 Add to cart | | Look here for install
Twin Motorcycles developed and tested from 2010 a new style intake manifold flange that will leak les then the original style Buell and Sportser intake flange. More can be read here about the development and testing the product here
This will fit on all Buell Tube Frame and Buell XB models2003- 2... | |
|
|
|
 | | | Midlock, feeler gauge set 1125 | €12,00 Add to cart | | Midlock, feeler gauge set
12 piece feeler gouge setunder a 45 deg. angle ideal for 1125measuring valve play
size indications in mm and inch
sizes in holder;
.002" , 0.051 mm
.003", 0.076 mm
.004" , 0.102 mm
.006" , 0.152 mm
.008", 0.203 mm
.010", 0.254 mm
0.012&quo... | |
|
|
All prices are excl. VAT.
