201 products found. Go to page:
|
|
|
 | | | Buell XB9R / XB12R Competition upper fairing | €318,00 Add to cart | | Buell XB9R / XB12R Competition upper fairing, shaped to stock size but with out the headlight holes
please note there is a fabrication time for 20 days for these parts
Please note these very important items!
We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the par... | |
|
|
|
 | | | Buell 1125R Endurance upper fairing | €355,00 Add to cart | | Buell 1125R Endurance upper fairing
This upper has the left headlight blocked off for that endurance race look.
The 1125R headlights will separate at the center so you use the right headlight only and install it in the opening. This way you lose some weight and gain space for a number plate
please note there is a ... | |
|
|
|
 | | | Buell XB 9/12 03-07 High Performance Oil pump gear | €140,00 Add to cart | | Buell XB 9/12 03-07 High Performance Oil pump gear
This is the High performance Oil Pump Drive Gear. Fit's on old tube frame models Buell S1, S2, S3, X1, M2 and Buell XB9/12 and Sportser from 1988 and up models.
It is the stronger version made than the Byrilium bronze one, hardeneded steel
This will fit all Bue... | |
|
|
|
 | | | Buell XB12X/Ss frame puck kit LONG | €189,00 Add to cart | | Buell XBFrame puck kit fits ONLY XB12X , XB12SS and XB12STT models).
Sold in pairs with all material for mounting and instructions.
Very important crash protection. You better put them on. Made out of a very high technologypolymer. We have doubled the wall thickness compared to stock OEM puck. We have a additional th... | |
|
|
|
 | | | Buell S1, S3, M2, X1 55 tooth Rear pully | €399,00 Add to cart | | Ready 22-6-2020 Buell Tube Frame models S1, S3, M2, X1 aftermarket Rear Pulley, 55 tooth (standard European) Fits all models with OEM 55tooth rear pully from 1995-2002
old part number 37727-97Y or37727-97Y or 40244-91
look here for front pully
| |
|
|
|
 | | | Buell XB 2003-2010 Billet catch can kit | €234,98 Add to cart | | Buell XB 2003-2010 models Black Anodized Billet catch can for all Buell XB 9/12models from 2003-2010. IN STOCK.
Catch can mounts to the front of the oil cooler mount, and is specifically designed for the Buell XB, so it looks like it belongs there. When you run your crankcase breather lines out of the intake, some accumu... | |
|
|
|
 | | | Buell 1125R 1125Cr Full dragrace system sidewinder | On request | | Buell 1125R and 1125CR 2008-2010 Full dragrace exhaust very loud and very good performance. This exhaust was designed by EBR and used in teh USA dragrace series.
This exhaust cannot run on the stock ECm and need a propper tuning on the dyno by a good dyno operator
| |
|
|
|
 | | | Buell 1125 R/CR 2008-2010 slipon exhaust system | On request | | Buell 1125 R/CR 2008-2010 slipon system for all Buell 1125 Models.
Comes complete with all hardware to mount.
Manufactured from the original Buell 1125 race exhaust.
Constructed from mandrel bent 20swg and 18swg stainless steel, fully tig welded and argon purged.
Remapping is essential with these headers. Pre prog... | |
|
|
|
 | | | Buell 1125 R/CR 2008-2010 full exhaust system | On request | | Buell 1125 R/CR 2008-2010 Full headers and slipon system for all Buell 1125 Models.
Comes complete with all hardware to mount.
Manufactured from the original Buell 1125 race exhaust.
Constructed from mandrel bent 20swg and 18swg stainless steel, fully tig welded and argon purged.
the previous system hit over 140bh... | |
|
|
|
 | | | Buell XB9/12 R / S / Sx / Scg frame puck kit | €189,00 Add to cart | | Buell XB Frame puck kit fits 2003-later XB9/12 models (except '06-later XB12Ss, XB12X and XB12STT models). Stock on '08 XB12R models. Sold in pairs with all material for mounting and instructions.
Very important crash protection. You better put them on. Made out of a very high technologypolymer. We have doubled t... | |
|
|
All prices are excl. VAT.
