201 products found. Go to page:
|
|
|
 | | | Buell M2 steering damper kit | €269,00 Add to cart | | Buell M2 steering damper Fit's on all Buell M2 Frames.
Side mount system to Buell M2 frame.
Complete Kit Damper and Mounting hardware, no extra hardware needed.
| |
|
|
|
 | | | Buell S1, S2, S3, M2, X1 High Flow air cleaner kit | On request | | Buell Buell S1, S2, S3, M2, X1 High Flow aircleaner kit tube frame High Flow aircleaner (Water repellent) kit
Performance air filter designed for the Buell tube frame models includes new breather bolts.
The 65mm diameter tubular stainless steel elbow is produced by a unique patented process that allows the use of thin... | |
|
|
|
 | | | Skf low friction fork sealset 47 mm gr dust + oil | €36,00 Add to cart | | Buell 1125 and Buell XB12X 2008 -up low friction fork seal set( GREEN )
set oil seal and dust seal , for 1 leg
slider diameter 47mm
if you are not sure please ask us !
1 SKF oil seal and 1 SKF wiper seal developed to achieve superior sealing performance.
New self-lubricating compound.
Virtually eliminatin... | |
|
|
|
 | | | Buell Sportster XR1200 XB Clutch spring | €26,00 Add to cart | | Sportster XR1200 Clutch spring ( 360 LBS )
for all Sportster (91 & later) and Buell (91-02 )
performance upgrade for XR1200 ( X ) ( stock spring = 320 LBS )
performance upgrade for Buell Xb 2006-up (stock spring = 320 LBS )
| |
|
|
|
 | | | Thermo-Tec heat barrier adhesive back | On request | | Thermo-Tec heat barrier adhesive back
12' x 24' (30 x 60 cm )
for heat isolating to protect inside fairings , and isolating XB / 1125 frame
The Adhesive Backed Heat Barrier protects parts and components from radiant heat. It can be used in applications to protect painted surfaces, plastic parts or any compo... | |
|
|
|
 | | | Buell 1125 Torque Hammer 2 exhaust | €899,00 Add to cart | | Twin Motorcycles Torque Hammer for the Buell 1125R and the Buell 1125CR.
The old Torque Hammer was a really strong low end Torqueexhaust. more info here: Only the design wasn't that good. After 4 years we also now understand hoe to design a exhaust. This is the last exhaust in our Buell family.
New steel outer bod... | |
|
|
|
 | | | Buell Aluminium 26T Teeth pulley | On request | | Buell tube frame models and Sportser Aluminium Race Pulley 26 Tooth
made out off 7075-T-651 Aluminium,
the 26 tooth pulley is designed for race applications,
and will wear out very quickly on the road !!! 8000 KM
2 Lbs ( +/- 1 Kg ) lighter than stock
| |
|
|
|
 | | | Buell XB 08-09 42 mm header | €599,00 Add to cart | | The Twin Motorcycles 42mm stainless steel equal lenght headers for all Buell XB9 and XB12 models from 2008-2009euro models
These are nice made stainless steel header pipes, with perfect welds. These equal lenght headers will increase performance on both the XB9 and XB12 models. Featuring equal length runners and spring m... | |
|
|
|
 | | | Buell 1125 R/CR High performance clutch kit | €299,00 Add to cart | | Buell 1125R and 1125CR 2008-2010 all models.High performance clutch kit. This kit consists of 9 friction plates, 10 steel plates, set off 6 x heavy duty springs. The Clutch springs are shorter than Original but 12% stonger at working height, installation and torque spec's are the same asstock.
For a good working of t... | |
|
|
|
 | | | Buell and Sportster TM New Style Intake Flange | €105,00 Add to cart | | Look here for install
Twin Motorcycles developed and tested from 2010 a new style intake manifold flange that will leak les then the original style Buell and Sportser intake flange. More can be read here about the development and testing the product here
This will fit on all Buell Tube Frame and Buell XB models2003- 2... | |
|
|
All prices are excl. VAT.
