284 products found. Go to page:
|
|
|
 | | |
|
|
 | | | Buell and Sportster Crank repair pressed bigend | €999,00 Add to cart | | Buell and Sportster Crank repair pressed big end pin. For all Buell X1, M2, S3, S3T, 1999- up models and all Buell XB9-12 from 2003-2007,and Sportster models 1999-up.
We could already offer to repair a flywheel, as a new pressed crank is very expensive, but we felt we could do it better, and make it stronger after the re... | |
|
|
|
 | | |
|
|
 | | | Size 98 Needle for HSR42 carburator | €14,00 Add to cart | | Buell HSR42 needle size 98 for tuning the Torque Hammer exhaust.
This needle with thepilot 25, main jet 165, is the perfect setup and tested in our Dyno for many customers with 2 inch and 2,5 inch version headers.
We recommand to use the lowest clip position on the needle. Depending on the airbox you can try 1-2 posit... | |
|
|
|
 | | | Buell 1125R and 1125CR 106MM BIG BORE KIT | On request | | This is a complete big bore kit from EBR to increase the displacment of your Buell 1125R or Buell 1125CR engine to 1190cc. This Big Bore kit will really wakeup your Buell 1125.
The Power is rated by EBR and add 8-11 RWHP across the whole usable RPM range, and there is a very nice increase in midrange torque. The kit cost... | |
|
|
|
 | | | High Temp Silicone gasket 300+ celcius | €24,00 Add to cart | | High Temperature silicone kit used for sealing engine parts as a liquid gasket.
Al surfaces needs to be cleaned propper before use.
We use it for the Buell 1125 Stator fix to keep teh wires in place
| |
|
|
|
 | | | Buell 1125 models 2009-2010 replacement stator | €266,00 Add to cart | | New Buell 1125R and 1125CR 2009-2010 stator. This stator is wound with 240 degrees C wire (vs. 200 degrees C stock) and ready to mount.
**Before installing this rebuilt stator be sure to get the upgraded version from us The TM developedrotor,otherwise stators will continue to burn and will not be covered under warranty.
... | |
|
|
|
 | | |
|
|
 | | | TM Buell Timing Cover 1983-2009 Vertical mount | €33,00 Add to cart | | Twin Motorcycles replacement Timing Cover for the Buell. 1983-2009 with the original Buell Pegasus logo.
THIS IS FOR ALL MODELS WITH THE VERTICAL MOUNTING HOLES (Buell old model header S1, S3, M2)
Fit's Buell Tube frame models and all Buell XB models with the vertical screws position.
Sold per piece, made out o... | |
|
|
|
 | | | TM Buell Timing Cover 1983-2009 Horizontal mount | €34,50 Add to cart | | Twin Motorcycles replacement Timing Cover for the Buell. 1983-2009 with the original Buell Pegasus logo. THIS IS FOR ALL MODELS WITH A HORIZONTAL MOUNTING.
Fit's Buell Tube frame models and all Buell XB models with the horizontal screws.
Sold per piece, made out of Aluminium with a black weather resistant coating.... | |
|
|
All prices are excl. VAT.
