14 products found. Go to page:
|
|
|
 | | | Stage 1 Buell XB9/12 2008-2010 ECM | On request | | When you already have a Exhaust (we hope you buy our Torque Hammer for the Buell XB 9-12 and K&N Air filter for your Buell XB9/12 2008-2009-2010 model, and you only want too have a good running Bike, Buy this ECM with our fuel and ignition map inside. I tested this ECM with all the big exhaust manufacturers, and with al... | |
|
|
|
 | | | Buell Race ECM for X1 and S3 models | On request | | Look here
Buell, X1/S3 Race ECM. This ECM comes with a stock calibrated fuel map from Buell. You can ask us to program it for your setup send me a e-mail at: dris@twinmotorcycles.nl
This race module provides an advance curve that allows the engine to rev to 6800 RPM. Module designed to work with other race system ... | |
|
|
|
 | | |
|
|
 | | | XB9-12 stage 1 kit 2008 - 2010 for stock EU header | On request | | Twin Motorcycles stage 1 kit for EUROPEAN BUELL XB MODELS WITH SMALL stock headers. SOUND CLIP
Our stage 1 kit for the XB12 makes between 92 and 96 HP and between 104 and 110NM of
Our stage 1 kit for the XB9 makes between80 HP and between 85 and 90NM of Torque.
This kit is made because a lot of international custom... | |
|
|
|
 | | | Buell 1125 Performance Intake stack | €109,00 Add to cart | | Twin Motorcycles Buell 1125 High Performance intake stacks. THIS IS A SET of 2 pieces for the front and rear cylinder. We achieve 144.2 RWHP and 121 NMof Torque SAECorrected on the rear wheel With stock 1125CR engine with:
Twin Motorcycles Intake stack
K&N filter
TwinMotorcycles fuel map on a stock ECM
Stock... | |
|
|
|
| | | Stage 1 Buell XB9/12 2008-2010 ECM | On request | | When you already have a Exhaust (we hope you buy our Torque Hammer for the Buell XB 9-12 and K&N Air filter for your Buell XB9/12 2008-2009-2010 model, and you only want too have a good running Bike, Buy this ECM with our fuel and ignition map inside. I tested this ECM with all the big exhaust manufacturers, and with al... | |
|
|
|
 | | | Stage 1 Buell 1125R and 1125CR ECM | On request | | When you already have a Exhaust (we hope you buy our Torque Hammer for the 1125) and Air filter for your Buell 1125R or 1125CR, and you only want too have a good running Bike, Buy this ECM with, our fuel and ignition map inside. I tested this ECM with all the big exhaust manufacturers, mounted on our test bike in our dyno r... | |
|
|
|
 | | | XB9-12 stage 1 kit 2008 - 2010 Big header | On request | | Our stage 1kitfor theXB12models 2008-2010 makes between 94 and 98.2 HP and between 104 and 108NM of Torque. SOUND CLIP
Our stage 1 kit for the XB9 makes between80 HP and between 85 and 90NM of Torque.
This complete kit is for the Buell XB 2008, 2009 and 2010 models only.
This kit is made because a lot of internatio... | |
|
|
|
 | | | Buell 1125R / 1125CR K&N Air filter BU-1108 | €71,00 Add to cart | | Buell 1125 K&N lifetime replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. BU-1108
These filters are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. Simply remove the disposable air filt... | |
|
|
|
 | | | Dyno all Buell XB and 1125, XR1200, Sportster | €600,00 Add to cart | | The remap of All new XB 2008-2009-2010 and 1125 Models is 1 full day job on the dyno. All the problems with jurking on low RPM, not smooth on the throttle, not delivering the power the engine can make are gone. We give a 100% money back guarantee, if you are not satisfied. Mail us for the possibilities.
| |
|
|
All prices are excl. VAT.
