2001 - 2005 Yamaha FJR1300 / A No Cut Frame Sliders

• Material: UHMW-PE (ultra high molecular weight polyethylene), aircraft grade aluminum
• No cut or plastic fairings modification required
• Fit models: Yamaha
• 2001 - 2005 FJR1300 / FJR1300A

This purchase is for a pair of frame sliders for the models above. The sliders feature a new design of a complete solid puck without a hollowed-out center. This increases the strength and contact surface to about 30%. The brackets are bolted to the engine mount and the aluminum spacer is bolted to the bracket. The slider puck is then screwed on to the spacer. The brackets have two attachment points preventing them from rotating in the event of a low side. The puck material is made of UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than Nylon and used in many industrial ball bearing and friction reducing applications. Compared to Delrin, it is softer but tougher. Delrin is harder but more brittle. It is an ideal material for slider since it can absorb more impact force onto itself and therefore reduce the impact on the frame and engine. The slider pucks can be inexpensively replaced in case of a low-side. We use highest grade commercially available 12.9(177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available.