|
|
 | Motul Multi ATF gear oil 1 Liter | €17,25 - Add to cart | Motul Multi ATF gear oil 1 Liter
100% Synthetic High Performance lubricant specially engineered for most moderntransmission with high performance clutch pack
for Buell XB, Xr1200 with high performance clutch packs
for use in Buell Xb and XR1200 gearboxes
withSlipper clutch and Alto carbonite clutch pack
and c... | |
|
|
|
 | Sportster and XR1200 Chrome Primary Cover Trim | €455,00 - Add to cart | Sportster and XR1200 Chrome Primary Cover Trim.
Fits 2004 and later Sportster XL and XR1200 models.
Dress your engine in chrome. This precision stamped steel cover wraps the Original Equipment aluminum primary cover in brilliant chrome, at a fraction of the cost of chrome replacement components. Kit includes chrome-pl... | |
|
|
|
 | Buell S1,S2,S3,M2,X1 Oil dipstick with temp gauge | €21,00 - Add to cart | OIL TANK DIPSTICK WITH TEMP.GAUGE BLACK
DIPSTICK IS 5.5CM BELOW RUBBER OF PLUG; 10 TO 177 DEGREE CELSIUS
Fits: > Tube frame Buell models , XL 82-03
Fits for all tube frame models
62565-96Y , Q0111.9Q
please note level markings can be off , healty advice for tube frame buell models , is keeping the oil leve... | |
|
|
|
 | Repair kit Check valve HD models | €14,00 - Add to cart | for repair on leaking check valves ( quick disconnect valve ) on your fuel tank
Eliminate the need for replacing expensive check valve and fuel line when only a rebuild is needed
Made from long-lasting, high-quality Dupont® Viton O-rings, solid brass nickel-plated check valve and stainless steel springs
Made i... | |
|
|
|
 | |
|
|
 | Screw, 3/8-16 X 1-1/8 socket hd. (grade 8) | €2,19 - Add to cart | Screw, 3/8-16 X 1-1/8 socket hd. (grade 8) 1x
Frame and Engine Mounts Screw, 3/8-16 X 1-1/8 socket hd. (grade 8). Sold per piece.
Used on the following models:
Buell S1
Buell S2
Buell S3
Buell M2
Buell X1
Buell XB9R
Buell XB9S
Buell XB12R
Buell XB12Scg
Buell XB12S
Buell XB12SS
Buell XB12STT
Buell XB... | |
|
|
|
 | handle bar indicators XL 04-13 black smoke | €74,75 - Add to cart | handle bar indicators XL 04-13 black smoke
Black. Smoke lens. Single intensity (single function), high intensity amber LEDs mounted in a billet aluminum housing. Complete with approx. 40cm long wires and ready to run. The amber colored LEDs are suitable for both turn signal or running lights function. Installs below bar ... | |
|
|
|
 | |
|
|
 | Brake pedal and gear pedal forward for Sportster | €305,00 - Add to cart | Black Brake pedal and gear pedal forward for Harley Davidson Sportster (Black)
Brake and shift pedals lever for Harley Davidson Sportster.
Bolt on kit, mounts directly on the foot rests and replaces completely the original levers.
CNC machined from top quality billet aluminium, stiffer and stronger than the stock par... | |
|
|
|
 | |
|
|
 | |
|
|
 | |
|
|
 | XR1200, Sportster adjustable lever set, Black AIRO | €219,00 - Add to cart | XR1200, Sportster adjustable lever set, Black AIRO
XR1200 and Sportster adjustable lever set (clutch and front brake lever), Black with Black Adjusters
Oberon Airo levers fit Harley Davidson 2004 and up Sportster XL 2004 -2020 and 2008 and up XR1200.
Oberon adjustable levers are not compatible with hydraulic clutch... | |
|
|
|
 | S&S 883 to 1200 conversion kit Black | €807,55 - Add to cart | S&S 883 to 1200 kit Black
XL 883 to 1200 Conversion Kit
Increase displacement from 883cc to 1200cc
Saves time because pistons are already fit to the cylinders
ready to assemble out of the box
Cylinders are constructed from premium aluminum castings with cast-in iron liners
No machining
No re-balanci... | |
|
|
|
 | Buell fifth countershaft gear | €199,00 - Add to cart | Twin Motorcycles new refabricated counter shaft fifth gear.
The counter shaft is made from case hardened steel by Twin Motorcycles
This part replaces the OEM number 35633-94
Fits all Buell Blast models
All Buell XB 2003-2005 models
All Tube frame Buell models 1994-2002
And all Harley Davidson Sportster mod... | |
|
|
|
 | |
|
|
 | 1 inch Moto Cross bar Steel Back | €125,00 - Add to cart | 1 inch Moto Cross bar Steel Back with TUV aproval
Black handlebar of 3mm thick seamless 4130 chromoly steel and TIG welded. - 1" diameter. - Slotted - Approx. dimensions: 31" wide x 4.25" rise x 2.75" pullback x 4.75" center width
Fits: > 82-21 H-D(excl. 08-21 e-throttle and 88-11 Springers... | |
|
|
|
 | |
|
|
 | Buell , XL head breather kit | €229,00 - Add to cart | Cool and clean cylinder head breather kit
with intake mounting
a very clean looking way to mount your intake on your Tube frame Buell or Sportster ( 91-06 )
and get right of the breather hoses
| |
|
|
|
 | Buell X1, M2, S1, S3 Cylinders | €240,00 - Add to cart | Replacement Cylinders for XL Evolution-Style Motors ( 1x )
sold each cylinder only
for pistons sets look here
Thunderstorm cylinder head pistons
Lightning cylinder head pistons
Replacement cylinders feature ductile cast-iron sleeves in aluminum castings
Sleeve has external ribs that “lock&rdquo... | |
|
|
|
 | |
|
|
 | S&S pinion gear white 86-87 models White | €374,45 - Add to cart | S&S pinion gear white 86-87 models White
S&S provides high quality 1986-'87 style pinion Sportster pinion gears for use with the S&S Evolution style pinion shafts used in S&S flywheel assemblies. These are the splined style pinion shafts as S&S does not produce the 1988 thru 1990 style keyed pinion shaft for Evolution st... | |
|
|
|
 | |
|
|
 | |
|
|
 | |
|
|
 | |
|
|
 | Off-Road Handlebar from tube 1 inch | €66,43 - Add to cart | Off-Road Handlebar from tube 25,4 mm Ø(1"), with notch for cables
steel tube with ABE
(For all HD from 82 up)
900 mm wide
130 mm high
95 mm pull back
155 mm bar ends rize
200 mm clamping
| |
|
|
|
 | |
|
|
 | |
|
|
 | Buell locknut 1/2-13 X 15/32 X 7/8 self-sealing 1x | €6,90 - Add to cart | Buell XB, Tube BuellandSportster locknut 1/2-13 X 15/32 X 7/8 self-sealing. Used as lock nut for the primary chain tensioner. Sold per piece.
Used on the following models:
1995 THUNDERBOLT - S2 1995/1996
1996 LIGHTNING - S1 1996/1997
1997 CYCLONE - M2 1997/1998
1997 THUNDERBOLT TOURING S3T 1997
1998 LIGHTNING - S1... | |
|
|
|
 | Buell Sportster cylinder and piston set XL 1200 | €738,00 - Add to cart | Buell Sportster cylinder and piston set XL 1200 1988-2003
These ready-to-install replacement cylinder and piston kits are a cost effective way to rebuild an Evolution engine. The cylinders have fine grain centrifugal cast ductile steel liners that are securely cast into the aluminum cylinders and are honed to size.
T... | |
|
|
|
 | OEM Buell Tube and Sportster Primary cover, Silver | On request | Buell M2, X1, S3 and Sportster 883 and 1200 Primary cover, Silver
Was standard on the following models:
1997 CYCLONE - M2 1997
1997 CYCLONE - M2 1997/1998
1998 1200 SPORT EVOLUTION - XLH1200S 1998 - (XL1200S) - 1998
1999 1200 CUSTOM - XLHC 1999 - (XL1200C) - 1999
1999 883 CUSTOM - XL883C 1999 - (XL883C) - 1999
19... | |
|
|
|
 | SHIDO LTZ8V Lion battery | €135,00 - Add to cart | SHIDO LTZ8V Lion battery
solution for a powerfull small battery
Voltage (V)
:
12
Capaciteit (Ah)
:
4.5
Lengte / lenght (mm)
:
113
Breedte / wide (mm)
:
69
Hoogte / height(mm)
:
105
Gewicht (kg) / weight
... | |
|
|
|
 | Buell XB, and Sportster Oil Seal Crankcase 1x | €7,90 - Add to cart | Buell XB, and Sportster Oil Seal Crankcase 1x
OEM part number 12068
1200 CUSTOM - (XL1200C) - 2010
1200 LOW - (XL1200L) - 2006-2010
1200 NIGHTSTER - (XL1200N) - 2010-2011
1200C CUSTOM - (XL1200C) - 2005-2009
1200N NIGHTSTER - (XL1200N) - 2007-2009
1200R ROADSTER - (XL1200R) - 2005-2009
2003 FIREBOLT - XB9R 2003
... | |
|
|
|
 | Mikuni HSR 42 jetting kit | €146,00 - Add to cart | Mikuni HSR 42 jetting kit
Jet Kits For HSR-42
Made in Japan
96,
97 and
98 needles (1 each); 2 #60 a/p nozzles; needle clip; all necessary washers, special jet box
HSR42 kit includes 150 through 170 main jets (2 each); 22.5 through 35 pilot jets (2 each);
| |
|
|
|
 | peg lowering set XL, Tube frame | €116,25 - Add to cart | Adjustable Lockable Offsets for foot pegs
KURYAKYN
Adjust pegs 2" or 4" forward, back, up or down for perfect comfort
360° of lockable adjustability
Have adjustable ends that let you rotate the location of the footpeg a full 360°
Lock securely in place when tightened so ... | |
|
|
|
 | Stainless exhaust flange kit | €56,00 - Add to cart | Stainless exhaust flange kit
Kits include two flanges and two retaining rings
Replacement retaining rings can be purchased separately
for all Buell XB and Tube Frame models, All XR1200 and Sportster models
and many HD bigwtin models
Stainless header nuts can be found here
| |
|
|
|
 | |
|
|
 | Throttle pipe & grip set 2 cable 1 inch | €33,00 - Add to cart | Throttle pipe & grip set 2 cable 1 inch
Replacement throttle and grip set for all models with Push-Pull dual throttle cables 1981 to present. Set contains throttle sleeve, left and right grip (OEM 56220-81B and 56206-81A).
replacement grips for all Sportster and XR1200 X models
| |
|
|
|
 | handle bar anti vibration damper kit 1 inch | €39,00 - Add to cart | handle bar vibration dampers 1 inch diameter
Solid brass kit. Handlebars act like a tuning fork. Adding weight to the handlebar ends makes it more difficult for the handlebar to vibrate at the grips, thus increasing comfort. Fits 1" handlebars. Weight approx. 286 grams each.
| |
|
|
|
 | S&S CYCLE AIR HORN CONVERSION KITS 2-1/2 | €144,38 - Add to cart |
S&S CYCLE
AIR HORN CONVERSION KITS 2-1/2"
Air Horn Kit
Kit includes: air horn, three mounting screws, carb support bracket (bracket connects the center crankcase bolt to the bottom manifold carburetor mounting bolt), two longer bottom carb-to-manifold mounting bolts and an enrichment ... | |
|
|
|
 | Super E Shorty Carburetor Kit XL Buell 91-03 | €695,00 - Add to cart | Super E Shorty Carburetor Kit XL Buell Tube frame models 91-03
Super E has a 1-7/8" throat at the butterfly and a 1-9/16" venturi and is recommended for use on Big Twin or Sportster engines up to 100-cubic-inch
If there is a doubt as to which carburetor to use, we suggest the 1-7/8" Super E
Each... | |
|
|
|
 | Buell 94-03 Alternator kit | €499,85 - Add to cart | BuellTube frame 94-03 Alternator kit
Kits include stator, rotor, black rectifying voltage regulator and mounting hardware
Made in the U.S.A.
Adding electrical accessories increases amperage usage. When doing so, it is important to consider amperage ratings of switches and wires. If you draw too many amps through a... | |
|
|
|
 | HASTINGS, PISTON RING SET. CHR/MOLY. +0,005 | €28,75 - Add to cart | HASTINGS, PISTON RING SET. CHR/MOLY. +0,005
SET FOR 2 CYLINDERS
Std cyl. bore: 3.4980" (88.85 mm).
1st. ring: 1.6mm.
2nd ring: 1.6mm.
oil ring: 4.0mm. Tech tip:
Piston grooves vs piston rings. It's not difficult to determine if a Hastings piston ring set will fit a certain piston. You should measu... | |
|
|
|
 | |
|
|
 | |
|
|
 | Buell XB, Tube, XL Timer stud set for ignition | €16,00 - Add to cart | Buell XB, Tube, Sportster Timerstud, to mount and adjust the ignition pickup plate, sold per set. ( 2x ) come with button head screws , counter sunck screws need to be ordered aditionaly
replacement for OEM number32606-82
Used on the following models:
1979-1985 SPORTSTER 1000 XLCR
1979-1985 XR1000 1977
1986-1990 ... | |
|
|
|
 | |
|
|
 | |
|
|
 | |
|
All prices are excl. VAT.