|
|
 | | XR1200 Detachable Sport Windscreen | €799,00 - Add to cart | | Harley Davidson, XR1200 Detachable Sport Windscreen Styled specifically for the XR1200 motorcycle, this wind deflector leads your charge down the asphalt.
The compact shape preserves the bike's raw, muscular look, but still splits the wind to take some of the air pressure off the chest.
The sleek low-profile wind ... | |
|
|
|
 | | Motul Multi ATF gear oil 1 Liter | €17,25 - Add to cart | | Motul Multi ATF gear oil 1 Liter
100% Synthetic High Performance lubricant specially engineered for most moderntransmission with high performance clutch pack
for Buell XB, Xr1200 with high performance clutch packs
for use in Buell Xb and XR1200 gearboxes
withSlipper clutch and Alto carbonite clutch pack
and c... | |
|
|
|
 | | Sportster and XR1200 Chrome Primary Cover Trim | €455,00 - Add to cart | | Sportster and XR1200 Chrome Primary Cover Trim.
Fits 2004 and later Sportster XL and XR1200 models.
Dress your engine in chrome. This precision stamped steel cover wraps the Original Equipment aluminum primary cover in brilliant chrome, at a fraction of the cost of chrome replacement components. Kit includes chrome-pl... | |
|
|
|
 | | Repair kit Check valve HD models | €14,00 - Add to cart | | for repair on leaking check valves ( quick disconnect valve ) on your fuel tank
Eliminate the need for replacing expensive check valve and fuel line when only a rebuild is needed
Made from long-lasting, high-quality Dupont® Viton O-rings, solid brass nickel-plated check valve and stainless steel springs
Made i... | |
|
|
|
 | | Screw, 3/8-16 X 1-1/8 socket hd. (grade 8) | €2,19 - Add to cart | | Screw, 3/8-16 X 1-1/8 socket hd. (grade 8) 1x
Frame and Engine Mounts Screw, 3/8-16 X 1-1/8 socket hd. (grade 8). Sold per piece.
Used on the following models:
Buell S1
Buell S2
Buell S3
Buell M2
Buell X1
Buell XB9R
Buell XB9S
Buell XB12R
Buell XB12Scg
Buell XB12S
Buell XB12SS
Buell XB12STT
Buell XB... | |
|
|
|
 | | Buell XB 08-10 XR1200 Crank repair pressed bigend | €1.200,00 - Add to cart | | Buell XB 08-10 , XR1200, XR1200X Crank repair pressed bigend
a very good solution , based on our proven 1,25 inch big end pin solution
we convert the flywheel and rod races of your 1,5 inch big end pin to accept our proven big end pin
new side play shimms, alined and welded back in for longer lasting straidness
... | |
|
|
|
 | | handle bar indicators XL 04-13 black smoke | €74,75 - Add to cart | | handle bar indicators XL 04-13 black smoke
Black. Smoke lens. Single intensity (single function), high intensity amber LEDs mounted in a billet aluminum housing. Complete with approx. 40cm long wires and ready to run. The amber colored LEDs are suitable for both turn signal or running lights function. Installs below bar ... | |
|
|
|
 | |
|
|
 | |
|
|
 | |
|
|
 | | XR1200, Sportster adjustable lever set, Black AIRO | €219,00 - Add to cart | | XR1200, Sportster adjustable lever set, Black AIRO
XR1200 and Sportster adjustable lever set (clutch and front brake lever), Black with Black Adjusters
Oberon Airo levers fit Harley Davidson 2004 and up Sportster XL 2004 -2020 and 2008 and up XR1200.
Oberon adjustable levers are not compatible with hydraulic clutch... | |
|
|
|
 | |
|
|
 | | XR1200X front brake line , custom | €158,00 - Add to cart | | XR1200X front brake line , custom
fitting options , Silver, black, gold, titanium, blue , red anodizing
many line colors contact us for options
custom lenght posible top line ( master to t point ) -/- 10 cm to +/+ 70 cm
Delivery contents:
Ready-to-mount line kit, incl. required accessories and certificate.
... | |
|
|
|
 | |
|
|
 | |
|
|
 | | 1 inch Moto Cross bar Steel Back | €125,00 - Add to cart | | 1 inch Moto Cross bar Steel Back with TUV aproval
Black handlebar of 3mm thick seamless 4130 chromoly steel and TIG welded. - 1" diameter. - Slotted - Approx. dimensions: 31" wide x 4.25" rise x 2.75" pullback x 4.75" center width
Fits: > 82-21 H-D(excl. 08-21 e-throttle and 88-11 Springers... | |
|
|
|
 | |
|
|
 | |
|
|
 | | Bassani XR1200 exhaust system Black | €745,00 - Add to cart | | Bassani XR1200 exhaust system Black
Road Rage II B1 Power 2:1 System
RACE USE ONLY ( no e-mark or ABE )
Designed specifically to address the needs of tuned motors built for high horsepower applications
Use a unique extended inner collector maximizing performance
4" straight-style performance muffler b... | |
|
|
|
 | |
|
|
 | |
|
|
 | | Off-Road Handlebar from tube 1 inch | €66,43 - Add to cart | | Off-Road Handlebar from tube 25,4 mm Ø(1"), with notch for cables
steel tube with ABE
(For all HD from 82 up)
900 mm wide
130 mm high
95 mm pull back
155 mm bar ends rize
200 mm clamping
| |
|
|
|
 | |
|
|
 | |
|
|
 | |
|
|
 | | Buell locknut 1/2-13 X 15/32 X 7/8 self-sealing 1x | €6,90 - Add to cart | | Buell XB, Tube BuellandSportster locknut 1/2-13 X 15/32 X 7/8 self-sealing. Used as lock nut for the primary chain tensioner. Sold per piece.
Used on the following models:
1995 THUNDERBOLT - S2 1995/1996
1996 LIGHTNING - S1 1996/1997
1997 CYCLONE - M2 1997/1998
1997 THUNDERBOLT TOURING S3T 1997
1998 LIGHTNING - S1... | |
|
|
|
 | | XR1200 and XR120X front wheel sliders | €196,00 - Add to cart | | XR1200 and XR120X front wheel sliders all year and all models.
XR1200 Fork Bottom Sliders are made with hard,
abrasion-resistant DELRIN plastic for excellent protection of the front wheel
and fork if you slide on the track,
with black anodized billet aluminum collars and chrome molybdenum bolts. (Set of 2)
| |
|
|
|
 | | XR1200 and XR1200X complete rear set SILVER | €891,00 - Add to cart | | XR1200 and XR1200X complete reaset Silver. Fits all models and all years XR1200 and XR1200X delivery time 4 weeks.
Rear set is made from high grade billet aluminum Silver (clear metal) anodized finish. Select from 5 adjustable foot peg positions that bring your feet up and back compared to stock. These Rear Sets can be s... | |
|
|
|
 | | XR1200 and XR1200X complete rearset BLACK | €891,00 - Add to cart | | XR1200 and XR1200X complete reaset BLACK. Fits all models and all years XR1200 and XR1200X delivery time 4 weeks.
Rear set is made from high grade billet aluminum with your choice of deep Black or Silver (clear metal) anodized finish. Select from 5 adjustable foot peg positions that bring your feet up and back compared t... | |
|
|
|
 | | XR1200 shifter kit only BLACK | €441,00 - Add to cart | | XR1200 shfter kit only BLACK fits all years and models XR1200 and XR1200 X delivery time 4 weeks.
Shift Pedal Assembly features a fully adjustable anodized billet aluminum shift pedal with double stainless bearings for the smoothest pedal movement. Includes Delrin pedal tip. Choice of Black or Silver.
| |
|
|
|
 | | XR1200 shifter kit only SILVER | €441,00 - Add to cart | | XR1200 shfter kit only SILVER fits all years and models XR1200 and XR1200 X delivery time 4 weeks.
Shift Pedal Assembly features a fully adjustable anodized billet aluminum shift pedal with double stainless bearings for the smoothest pedal movement. Includes Delrin pedal tip. Choice of Black or Silver.
| |
|
|
|
 | | XR1200 and XR1200X Frame sliders | €365,00 - Add to cart | | XR1200 and XR1200X Frame sliders. its all years and all models XR1200
feature slider pucks made of high density, abrasion-resistant DELRIN plastic, for maximum protection of the exposed engine and exhaust parts if in a slide at speed on the track. Sliders are attached to the frame with black anodized billet aluminum moun... | |
|
|
|
 | | SILVER XR1200 and XR1200X aluminium pully cover | €365,00 - Add to cart | | SILVER CR1200 and XR1200X aluminium pully cover delivery tim 4 weeks,
Fits all models and all years XR1200 and XR1200X
replaces the stock pulley fairing, adding a unique custom look to your XR1200. Also looks great when installed with our XR1200 Rear Sets. Made of billet aluminum anodized in your choice of Black or Si... | |
|
|
|
 | | BLACK XR1200 and XR1200X aluminium pully cover | €365,00 - Add to cart | | XR1200 and XR1200X aluminium pully cover delivery tim 4 weeks,
Fits all models and all years XR1200 and XR1200X
replaces the stock pulley fairing, adding a unique custom look to your XR1200. Also looks great when installed with our XR1200 Rear Sets. Made of billet aluminum anodized in your choice of Black or Silver fi... | |
|
|
|
 | | O-Ring Jiffy fitting, Xb and XR1200 | €0,75 - Add to cart | | O-Ring Jiffy fitting, Xb and XR1200
inner O-ring in the fitting
O-Ring Jiffy fitting
part number 11110,
for the 2006 and up models Swing arm, for the 2008 XB models and up Oil pump and swing arm
and XR1200 ( X )models
sold per piece
| |
|
|
|
 | | SHIDO LTZ8V Lion battery | €135,00 - Add to cart | | SHIDO LTZ8V Lion battery
solution for a powerfull small battery
Voltage (V)
:
12
Capaciteit (Ah)
:
4.5
Lengte / lenght (mm)
:
113
Breedte / wide (mm)
:
69
Hoogte / height(mm)
:
105
Gewicht (kg) / weight
... | |
|
|
|
 | | Buell XB, and Sportster Oil Seal Crankcase 1x | €7,90 - Add to cart | | Buell XB, and Sportster Oil Seal Crankcase 1x
OEM part number 12068
1200 CUSTOM - (XL1200C) - 2010
1200 LOW - (XL1200L) - 2006-2010
1200 NIGHTSTER - (XL1200N) - 2010-2011
1200C CUSTOM - (XL1200C) - 2005-2009
1200N NIGHTSTER - (XL1200N) - 2007-2009
1200R ROADSTER - (XL1200R) - 2005-2009
2003 FIREBOLT - XB9R 2003
... | |
|
|
|
 | |
|
|
 | | peg lowering set XL, Tube frame | €116,25 - Add to cart | | Adjustable Lockable Offsets for foot pegs
KURYAKYN
Adjust pegs 2" or 4" forward, back, up or down for perfect comfort
360° of lockable adjustability
Have adjustable ends that let you rotate the location of the footpeg a full 360°
Lock securely in place when tightened so ... | |
|
|
|
 | | Stainless exhaust flange kit | €56,00 - Add to cart | | Stainless exhaust flange kit
Kits include two flanges and two retaining rings
Replacement retaining rings can be purchased separately
for all Buell XB and Tube Frame models, All XR1200 and Sportster models
and many HD bigwtin models
Stainless header nuts can be found here
| |
|
|
|
 | |
|
|
 | | Throttle pipe & grip set 2 cable 1 inch | €33,00 - Add to cart | | Throttle pipe & grip set 2 cable 1 inch
Replacement throttle and grip set for all models with Push-Pull dual throttle cables 1981 to present. Set contains throttle sleeve, left and right grip (OEM 56220-81B and 56206-81A).
replacement grips for all Sportster and XR1200 X models
| |
|
|
|
 | | handle bar anti vibration damper kit 1 inch | €39,00 - Add to cart | | handle bar vibration dampers 1 inch diameter
Solid brass kit. Handlebars act like a tuning fork. Adding weight to the handlebar ends makes it more difficult for the handlebar to vibrate at the grips, thus increasing comfort. Fits 1" handlebars. Weight approx. 286 grams each.
| |
|
|
|
 | |
|
|
 | | XR1200X Torque Hammer III exhaust full black | €1.251,11 - Add to cart | | XR1200X Torque Hammer III 2-1 exhaust system race system Full Black version
( all black= header pipes, muffler and mounting brackets are black ceramic coated )
the 3e version XR1200 and XR1200X 2008 and later 2-1 Torque Hammer III Race exhaust, that comes with a 3 year full warranty
The development and testing of t... | |
|
|
|
 | |
|
|
 | |
|
|
 | |
|
|
 | |
|
|
 | | Buell Sportster Pinion gear locker tool XB | €58,00 - Add to cart | | Buell Sportster Pinion gear locker tool XB
Use tool to lock pinion gear when torquing the pinion
nut. Tool is simple to use, just align underneath
gear and screw into case.
for all Buell Tube frame models 2000-2002for all Buell Xb models 2003-2007
for all Sporster models 2000-2016
do not use impact tools !!!
| |
|
|
All prices are excl. VAT.
