8 products found. Go to page:
|
|
|
 | | | Stage 1 Buell XB9/12 2008-2010 ECM | On request | | When you already have a Exhaust (we hope you buy our Torque Hammer for the Buell XB 9-12 and K&N Air filter for your Buell XB9/12 2008-2009-2010 model, and you only want too have a good running Bike, Buy this ECM with our fuel and ignition map inside. I tested this ECM with all the big exhaust manufacturers, and with al... | |
|
|
|
 | | | Buell Ecm communication device | €52,50 Add to cart | | Buell ECMcommunication device FUELMAPS CAN BE PURCHASED HERE
must need for every Bueller
to getter with a andoid device ( ECM droid )
also can be used to flash fuel mappings and change settings
device-Name: XBlue_v2
There is no need to pair the XBlue_v2 with the Android device as was required in previous versio... | |
|
|
|
 | | | Buel XB and 1125 2008-2010 ECM with Tune | On request | | Buel XB and 1125 2008-2010Race ECM with Tune
You can tell us what intake, header and exhaust you run, and we program this inside the ECM.
TPS zero position must be set after installation
note the Model bike , model year, and exhaust in the order commends
| |
|
|
|
 | | | XB9-12 stage 1 kit 2008 - 2010 for stock EU header | On request | | Twin Motorcycles stage 1 kit for EUROPEAN BUELL XB MODELS WITH SMALL stock headers. SOUND CLIP
Our stage 1 kit for the XB12 makes between 92 and 96 HP and between 104 and 110NM of
Our stage 1 kit for the XB9 makes between80 HP and between 85 and 90NM of Torque.
This kit is made because a lot of international custom... | |
|
|
|
| | | Stage 1 Buell XB9/12 2008-2010 ECM | On request | | When you already have a Exhaust (we hope you buy our Torque Hammer for the Buell XB 9-12 and K&N Air filter for your Buell XB9/12 2008-2009-2010 model, and you only want too have a good running Bike, Buy this ECM with our fuel and ignition map inside. I tested this ECM with all the big exhaust manufacturers, and with al... | |
|
|
|
 | | | XB9-12 stage 1 kit 2008 - 2010 Big header | On request | | Our stage 1kitfor theXB12models 2008-2010 makes between 94 and 98.2 HP and between 104 and 108NM of Torque. SOUND CLIP
Our stage 1 kit for the XB9 makes between80 HP and between 85 and 90NM of Torque.
This complete kit is for the Buell XB 2008, 2009 and 2010 models only.
This kit is made because a lot of internatio... | |
|
|
|
 | | | Dyno all Buell XB and 1125, XR1200, Sportster | €600,00 Add to cart | | The remap of All new XB 2008-2009-2010 and 1125 Models is 1 full day job on the dyno. All the problems with jurking on low RPM, not smooth on the throttle, not delivering the power the engine can make are gone. We give a 100% money back guarantee, if you are not satisfied. Mail us for the possibilities.
| |
|
|
|
 | | | ECMSPY USB programming cable | €51,00 Add to cart | | Twin MotorcyclesUSB programming cable forDiagnose your Buell or program the ECM on the Dyno or Remoto programming by us. For use with ECM SPY on all Buell Models.
The cable will work on all BuellXB and 1125 stock ECM's. Be sure to put a Battery charger on the bike when diagnosing or when we remote program your Buell.... | |
|
|
All prices are excl. VAT.
