Search

You are in the category: BUELL ECM
Choose your model: 1125R | 1125CR | M2 | S1 | S2 | S3/S3T | X1 | XB9R | XB12R | XB9S | XB9SX | XB12S | XB12Scg | XB12Ss | XB12STT | XB12SX | XB12X | XB12XP | XB12XT | 1125R/CR | XB9-XB12 till 2007 | XB9-XB12 2008/2009

18 products found. Go to page:

<< Previous  
1   2  
Next >>

   
Buell Race ECM for X1 and S3 models€399,00
Buell, X1/S3 Race ECM. This ECM comes with a stock calibrated fuel map from Buell. You can ask us to program it for your setup send me a e-mail at: dris@twinmotorcycles.nl This race module provides an advance curve that allows the engine to rev to 6800 RPM. Module designed to work with other race system components to ach...
   
DYNA-2000HD MODULE. SINGLE/DUAL FIRE€242,15
DYNA-2000HD MODULE SINGLE/DUAL FIRE for XL / tube frame Buell models with 8 pin Deutsch connection as replacement for 31652-96Y or N0306.9A can be used a simple plug in, but also to change to *single spark ignition on your S1,M2 & S3 Carb *( will need a other coil for single spark operation ) Product Overvie...
   
Buel XB12 2004-2007 ECM with Tune€522,00
Buel XB12 2004-2007 ECM with Tune. You can tell us what intake, header and exhaust you run, and we program this inside the ECM. TPS zero position must be set after installation You can but a Cable to do that HERE
   
Buell, Stock ECM X1 all models€330,00
Ask us for uptions Buell, Stock ECM X1 all models * please note * Ecm's wil need to be AFV reset and Tps adjusted before you can run it. The
   
BUE2D Firmware relash 2008-2010 Buell XB and 1125€50,00
When you have a 2008-2010 model OEM ECM, we can reflash this to the latest BUE2D Dealer EEPROM for you. We charge 50 euro to do this. We have seen broken ECM's burned ECM's we could not save we only know when we receive the ECM and test it here. When you send us your ECM, please put a paper in the box where we...
   
buell parts online€0,00
Buell parts online For OEM Parts go here: https://www.twinmotorcycles.nl/webshop/index.asp?mc=1 For aftermarket parts go here:https://www.twinmotorcycles.nl/webshop/index.asp?guid=YXHFSC&cid=5365and see For technical and install and maintenance articles go here:https://www.twinmotorcycles.nl/artikelen.asp?ci...
   
Buell, Stock ECM X1 all models€215,28
Please ask us for replacement Buell, Stock ECM X1 all models * please note * Ecm's wil need to be AFV reset and Tps adjusted before you can run it
   
BLACK XB9-12 stage 1 kit 2008 - 2010 stock header€965,00
Twin Motorcycles BLACKVERSIONstage 1 kit for EUROPEAN BUELL XB MODELS WITH SMALL stock headers. SOUND CLIP Our stage 1 kit for the XB12 makes between 92 and 96 HP and between 104 and 110 NM of Our stage 1 kit for the XB9 makes between 80 HP and between 85 and 90 NM of Torque. This kit is made because a lot of inter...
   
XB9-12 stage 1 kit 2008 - 2010 stock header€800,00
Twin Motorcycles stage 1 kit for EUROPEAN BUELL XB MODELS WITH SMALL stock headers. SOUND CLIP Our stage 1 kit for the XB12 makes between 92 and 96 HP and between 104 and 110NM of Our stage 1 kit for the XB9 makes between80 HP and between 85 and 90NM of Torque. This kit is made because a lot of international custom...
   
TM ECM Reflash all models€425,00 €200,00
We offer the service to reprogram the stock Buell ECM without going to the dyno. For the older models we can e-mail you the file to program it with ECMSPY, and we support how to do that. For the newer models Buell we do that online when your bike is connected to the internet with us. After 11years of dynowork we know it ...
All prices are excl. VAT.