20 products found. Go to page:
|
|
|
 | | |
|
|
 | | | Buell 1125R 1125Cr Full dragrace system sidewinder | On request | | Buell 1125R and 1125CR 2008-2010 Full dragrace exhaust very loud and very good performance. This exhaust was designed by EBR and used in teh USA dragrace series.
This exhaust cannot run on the stock ECm and need a propper tuning on the dyno by a good dyno operator
| |
|
|
|
 | | | Buell 1125 R/CR 2008-2010 full exhaust system | €2.110,00 Add to cart | | Buell 1125 R/CR 2008-2010 Full headers and slipon system for all Buell 1125 Models.
Comes complete with all hardware to mount.
Manufactured from the original Buell 1125 race exhaust.
Constructed from mandrel bent 20swg and 18swg stainless steel, fully tig welded and argon purged.
the previous system hit over 140bh... | |
|
|
|
 | | | GPR E-mark exhaust Buell 1125 R and CR | €734,34 Add to cart | | Buell 1125 R - CR Mid- Full System,Homologated
GPR POWERCONE EVO Slip-on kit with removable db killer (baffle) for racing use,it include specific link pipe, brackets, holder and fasteners, link pipe and caps totally stainless steel made (Aisi 304) while silencer body is made by STAINLEES STEEL INOX AISI 304. It is stree... | |
|
|
|
 | | |
|
|
 | | |
|
|
 | | | Buell 1125 R/CR header set | On request | | Buell 1125 R/CR header set
custom hand made
stainless steel header set for the Buell 1125 R/CR models 2008-2010
as replacement part ( fits original exhaust )
| |
|
|
|
 | | | Stainless exhaust clamp 43-47 mm ( 1x ) | €6,95 Add to cart | | Stainless exhaust clamp 43-47 mm ( 1x )
for 1125 Aftermarket exhaust
Remove the bolt and flip open the hinged bridge to install.
The bolt design provides good strength and creates a 360° seal to prevent leaks. Clamps have rolled edges to protect soft hose and tube, such as silicone. Do not exceed the maximum to... | |
|
|
|
 | | |
|
|
 | | | Buell 1125 Torque Hammer 2 exhaust | €899,00 Add to cart | | Twin Motorcycles Torque Hammer for the Buell 1125R and the Buell 1125CR.
The old Torque Hammer was a really strong low end Torqueexhaust. more info here: Only the design wasn't that good. After 4 years we also now understand hoe to design a exhaust. This is the last exhaust in our Buell family.
New steel outer bod... | |
|
|
All prices are excl. VAT.
