58 products found. Go to page:
|
|
|
 | | | Cable luber TM | €16,70 Add to cart | | Cable Luber
This tool is used to inject lubricant into any mechanical cable housing. The tool clamps over your cable housing and inner cable
allowing you to connect an aerosol lube can of cablelube to this luber tool.
Spray until the lube runs out the other end of cable housing.
For all Buell , Sportster and XR1200 ... | |
|
|
|
 | | | Piston ring compressor tool | €142,00 Add to cart | | Jims Piston ring compressor set, supplied with 6 bands ranging from 2-7/8” to4-3/8”.
Fine tooth ratcheting motion to compress
bands in small increments for accurate compression(Will not break or damage rings)
for all Buell and Sportster engines.
| |
|
|
|
 | | | Hydraulic Brake Bleeder | €19,00 Add to cart | | The Hydraulic brake bleeder, makes bleeding your brakes a one-person job at home.
Will not bleed air from a dry system.
This Brake Bleeder is a one-way check valve. This tool allows air andbrake fluid to escape, but will not allow air to re-enter the system.
Note: This tool will notbleed air from a dry system, for ... | |
|
|
|
 | | | Receptable extractor 6 in 1 compression tong 1764 | €34,00 Add to cart | | 6-IN-1 Star Receptacle Extractors compression tong. Easily remove an assortment of harnessstyle receptacle pins with either of
these 6-in-1 tools.Designed for automobiles, we have found these to work equally well on
all model Buells, XR1200 and Sportster models.
No.1764 - Use on most compression tong style
connectors
... | |
|
|
|
 | | | Receptable extractor 6 in 1 ALDL, pack-con 1763 | €27,00 Add to cart | | Receptable extractor 6 in 1 ALDL, pack-con , Weather sealed 1763
Easily remove an assortment of harnessstyle receptacle pins with either ofthese 6-in-1 tools.
Designed for automobiles,we have found these to work equally well on allBuell models XR1200 and Sportster.
Use on ALDL, Pack-Con, and weather sealed connectors... | |
|
|
|
 | | | Buell and Sortster Piston ring groove cleaner | €59,83 Add to cart | | Buell and XR1200 and Sportster Piston ring groove cleaner.
Use this tool to remove carbon build-up from the two piston compression ring slots.
This tool includes twocleaning spurs with sizes: 5/64”, 3/32”, 1/8”, 5/32”,3/16”, 1/4”, 1.5mm, 1.75mm, 2mm.
Use on all 2 3/4” to 5&... | |
|
|
|
 | | | Buell and Sportster Pulley lock tool | €235,00 Add to cart | | Jims Pulley Lock Tool
Use this tool to lock the final drive sprocket when
removing and installing the sprocket nut.
Use on all Sportsters® 1991-present (28T
and 29T only).
Use on all Buell tube frame models 1994-2002 (28T and 29T only).
Will also fit on XB 27 T pully
| |
|
|
|
 | | | Piston ring expander tool | €35,25 Add to cart | | Jims Piston ring expander tool
Use to remove and install piston rings. Reduces the
risk of ring breakage. This tool has tappered jaws to
hold all normal size rings from 3/64" to 1/4" ( 1.2 - 6.3mm) thickness. | |
|
|
|
 | | | TM Buell Rear shock tool for preload adjustment | On request | | The Twin Motorcycles tool for the Buell rear shock preload adjustment
Can be used for all TM tube frame rear shocks on all Buell Tube models to adjust preload.
Can be used for all Buell XB rear shocks to adjust preload.
And for most other shock absorbers that has a preload adjuster.
| |
|
|
|
 | | | O2 sensor tool | €20,25 Add to cart | | Snap-on O2 sensor tool
3/8 inch Drive, to remove the O2 sensor with out roating the engine on Xb Models
O2 sensor can be reached on Xb models after removing the rear shock absorber and cooling fan
( bike should be very good supported before you remove the rear shock absorber )
can also be used with hard to reach... | |
|
|
All prices are excl. VAT.
