2011 - 2014 Ducati Panigale 1199 / S / R No Cut Frame Front & Rear Axle Sliders
Condition: New
Special feature: Brackets are designed NOT to rotate in the event of a low side. Rear axle sliders doubles as spools
Material: UHMW-PE (ultra high molecular weight polyethylene), aircraft grade aluminum
No cut or plastic fairing modifications required
Fit Models: Ducati
2011 - 2014 Panigale 1199 / S / R
This purchase is set of frame slider, case cover, front axle sliders, and rear axle sliders for the models above. The sliders feature a new design of a complete solid puck without a hollowed-out center. This increases the strength and contact surface to about 30%. The bracket is bolted to the engine mount and the slider puck is bolted onto it. The left side bracket has three attachment points preventing it from rotating in the event of a low side. For the right side, we have designed a custom case slider to protect the bikes expensive clutch. The material of the puck is made of UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than Nylon and used in many industrial ball bearing and friction reducing applications. Compared to Delrin, it is softer but tougher. Delrin is harder but more brittle. It is an ideal material for frame sliders since it can absorb more impact force onto itself and therefore reduce the impact on the frame and engine. The slider pucks can be inexpensively replaced in case of a low-side. We use highest grade commercially available 12.9(177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available.
