112 products found. Go to page:
|
|
|
 | | OEM Buell Tube and Sportster Primary cover, Silver | €571,00 Add to cart | Buell M2, X1, S3 and Sportster 883 and 1200 Primary cover, Silver
Was standard on the following models:
1997 CYCLONE - M2 1997
1997 CYCLONE - M2 1997/1998
1998 1200 SPORT EVOLUTION - XLH1200S 1998 - (XL1200S) - 1998
1999 1200 CUSTOM - XLHC 1999 - (XL1200C) - 1999
1999 883 CUSTOM - XL883C 1999 - (XL883C) - 1999
19... | |
|
|
|
 | | Mikuni HSR 42 jetting kit | €146,00 Add to cart | Mikuni HSR 42 jetting kit
Jet Kits For HSR-42
Made in Japan
96,
97 and
98 needles (1 each); 2 #60 a/p nozzles; needle clip; all necessary washers, special jet box
HSR42 kit includes 150 through 170 main jets (2 each); 22.5 through 35 pilot jets (2 each);
| |
|
|
|
 | | S&S CYCLE AIR HORN CONVERSION KITS 2-1/2 | €144,38 Add to cart |
S&S CYCLE
AIR HORN CONVERSION KITS 2-1/2"
Air Horn Kit
Kit includes: air horn, three mounting screws, carb support bracket (bracket connects the center crankcase bolt to the bottom manifold carburetor mounting bolt), two longer bottom carb-to-manifold mounting bolts and an enrichment ... | |
|
|
|
 | | Super E Shorty Carburetor Kit XL Buell 91-03 | €695,00 Add to cart | Super E Shorty Carburetor Kit XL Buell Tube frame models 91-03
Super E has a 1-7/8" throat at the butterfly and a 1-9/16" venturi and is recommended for use on Big Twin or Sportster engines up to 100-cubic-inch
If there is a doubt as to which carburetor to use, we suggest the 1-7/8" Super E
Each... | |
|
|
|
 | | Buell XB, Tube, Sportster Timer stud for ignition | €8,50 Add to cart | Buell XB, Tube, Sportster Timerstud, to mount and adjust the ignition pickup plate, sold per piece. ( 1x )
replacement for OEM number32606-82
Used on the following models:
1979-1985 SPORTSTER 1000 XLCR
1979-1985 XR1000 1977
1986-1990 883 EVOLUTION - XLH 1986-1990
1995 883 STANDARD EVOLUTION -
XL883 1995-1996
1... | |
|
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | Buell Sportster Pinion gear locker tool XB | €36,75 Add to cart | Buell Sportster Pinion gear locker tool XB
Use tool to lock pinion gear when torquing the pinion
nut. Tool is simple to use, just align underneath
gear and screw into case.
for all Buell Tube frame models 2000-2002for all Buell Xb models 2003-2007
for all Sporster models 2000-2016
do not use impact tools !!!
| |
|
|
|
 | | Piston ring kit Stock size 1x (2 NEEDED) | €44,00 Add to cart | Piston ring kit Stock size 1x (2 NEEDED)
Buell XB 2003-2010 ,XR1200 2008- 2012 and Sportster 2004 -up
stock size replacement piston ring kit for Oem pistons 3,5 inch bore
replacement for OEM 21948-02
top ring 1,2 mm think , 2e compression 1,5 mm thick , oil rings 2,5 mm thick
set is for 1pistons !
please n... | |
|
|
All prices are excl. VAT.