17 products found. Go to page:
|
|
|
 | | |
|
|
 | | | Buell XB, 1125, drive bushings front brake disc 1x | €3,92 Add to cart | | Buell XB 9/12 2003-2010 and Buell1125 R/CR 2008-2010drive bushings front brake disc sold 1 piece.
6 are needed for front wheel.
TM-CB0006Buell XB -1125 squire washer front brake disc
TM-H0506Buell XB, 1125, drive bushings front brake disc
TMXB1125Buell XB9/12 1125 R/CR Spring front brake
TMCA0014.02A8Buell XB... | |
|
|
|
 | | | Buell XB -1125 squire washer front brake disc 1x | €1,84 Add to cart | | New production TM product
For Buell XB and 1125 squire washer for front brake disc mounting
sold each ( 1 x)
TM-CB0006Buell XB -1125 squire washer front brake disc
TM-H0506Buell XB, 1125, drive bushings front brake disc
TMXB1125Buell XB9/12 1125 R/CR Spring front brake
TMCA0014.02A8Buell XB 9/12 1125 R... | |
|
|
|
 | | | Buell XB 9/12 1125 R/CR wheel Idler belt pulley | €173,60 Add to cart | | Buell XB 9-12 2003-2010 and Buell 1125R and CR 2008-2010 wheel Idler belt pulley complete kit.
THIS IS ONLY THE IDLER PULLY COMPLETE NOT THE REAR PULLEY
Black hard annodized , comes with bearings, spacers and c-clip ( stainless T
fits all Buell XB9/12 modelsand alls Buell 1125R and 1125CRmodels.
Part number; G06... | |
|
|
|
 | | | handle bar vibration dampers Stainless steel | €75,20 Add to cart | | handle bar vibration dampers Stainless steel 7/8 - 22 mm handle bar ( 12-19 mm collet adaptor )
Large Universal Bar End Weights CNC machined in Stainless Steel from Oberon Performance. Utilising the Oberon Performance expanding collet system, these bar end weights are suitable for any 7/8" or 1" handlebar with ... | |
|
|
|
 | | | Buell XB 9/12 1/4-20 X 3/4 truss hd. Torx | €4,60 Add to cart | | Screw, 1/4-20 X 3/4 truss hd. Torx T27
can be used on all XB and tube frame model
self retaining wear washers black TMBA0409.6BL
self retaining wear washers whiteTM-BA0409.6
to replace these screws ;
AA0406.11CXVB
AA0406.11CVB
AA0406.11CBBL
| |
|
|
|
 | | |
|
|
 | | | Buell XB 9/12 1125 R/CR Tube frame bronze bushing | On request | | Buell XB 9/12 03-10, Buell 1125 R/CR 08-10,Buell Tube frame 01-up, set bronze pedal bushings ( 2x bushings ).
Theselast longer then the plastic N0513.T bushings, and is a direct replacement.
Can be used on shift or brake lever for Buell XB 9/12 and1125 R/CR Brake lever
Tube frame models 2001- up ( new model Shift l... | |
|
|
|
 | | | Universal throttle cable kit 6MM outer, 1.35M | €26,00 Add to cart | | Universal throttle cable kit 6MM outer, 1.35M long ( 1x )can be used as push or pull cable
High quality universal throttle cable kit includes 1.35m of standard black conduit with Teflon liner, 1.6m of inner wire and selection of fittings. One end of the inner wire is fitted with a carburettor nipple (EE7). The other end ... | |
|
|
|
 | | | Buell throttle with push/pull twist grip | €86,00 Add to cart | | throttle push/pull twist gripfor all buell models with 22 mm ( 7/8 ) handle bar
no cables are included !!
Push and Pull twist grip with lightweight die cast alloy body, complete with rotor 37mm in diameter and cable boot
Suitable as an aftermarket replacement for standard throttle body on bikes with Push/Pull throt... | |
|
|
All prices are excl. VAT.
