78 products found. Go to page:
|
|
|
 | | | Buell XBS throttle cable kit OEM fitting | €87,00 | | Buell replacementthrottle cable kit OEM fitting. Fit's allXB12S , XB12Scg, XB12Sx, XB12SS, XB12Stt, XB9S, XB9SL , XB9S./
1x pull cable
1 x push cable
for Oem replacement XB12S , XB12Scg, XB12Sx, XB12SS, XB12Stt, XB9S, XB9SL , XB9Sx
all model years
| |
|
|
|
 | | | replacement set Throttle cables with grip XBS | €87,00 | | replacement set Throttle cables withgrip XB S ( lightning models 2003- 2007 ) to be used with Small starter button switch can be found here ,
1/4 turn throttle
cables are ready made to lenght for XB lighting models XB12S, Scg, Ss, Stt,XB9S , XB9Sl, XB9Sx all 2003-2007 models
1x pull cable
1 x push cable
1 x t... | |
|
|
|
 | | | Buell throttle shaft X1, S3, XB9 03 | €137,00 | | Here is a repair solution for your Broken throttle shaft for your your Buell X1 all models and years, Buell S3 1999- up and Buell XB9 2003 models.
look here for the Install manual
don't forget to order intake seals
how to set the TPS on your bike
| |
|
|
|
 | | | Buell S1, S3, M2, X1 Pin sidestand pivot stainless | €24,30 | | Buell S1, S3, M2, X1 1995-2003 Pin sidestand pivot made out of stainless steel.Circlipcan be found here
Old part number 50113-96Y , L0174.9
PIN, sidestand pivot M2
PIN, sidestand pivot S1
PIN, sidestand pivot S3
PIN, sidestand pivot X1
| |
|
|
|
 | | | Buell X1 ,S1, M2, S3 front engine mount | €192,56 | | Billet Aluminum Engine Mount Fit's only OEMX1 ,S1, M2, S3heads on a Tube Frame Buell. Replacement part for stock engine mountand much stronger then OEM. Fit's not on BuellS2, RR1000, RR1200, RS1200.
For owners of Buell tube frame models, we offer a billet aluminum mount with the holes correctly located for Origin... | |
|
|
|
 | | | Buell Tube frame rubber strip 90x30x2mm 1zk | €3,90 | | Buell Tube frame rubber pad 90x30x2mm 1zk self adhesive. Clean the surface you want to put it on remove the paper and stick it on. Used on differenTube frame models on different locations look at the pictures below. the size is90 x 30 x (2mm thick) (
The material is the same size as original and 2 mm thick. Quality is be... | |
|
|
|
 | | | Buell XB 9/12 and 1125 Tail Bag | €136,00 | | Twin Motorcycles aftermarket Buell Tail Bag.
Original made by Buell for the XBS models, but obsolete. We make this to fit on All '03-later XB9S and '04-later XB12S models. DOES NOT FIT XB12X. But they will also fit on the XB9/12R models and 1125 R and CR models.Attractive styling and custom fit design to place ov... | |
|
|
|
 | | | TM Buell XB 9/12 04-10 REAR pulley 65T | €216,00 | | Twin Motorcycles Buell XB 9/12 aftermarket rear pully
for all 2004 till 2010 Buell XB models.
65 tooth aftermarket Pully.
Black hard anodized for long lasting.
| |
|
|
|
 | | | Buell Leather Jacket Size 48 | €499,00 | | This beautiful made Leather Buell JacketIs HAND MADE in Holland from the finest leather. AFTER PAYMENT 8WEEKS WAITING TIME (MADE ON ORDER). SIZE 48. Comes with elbow and shoulder and back REMOVABLE protection.
We are developing a handmade leather (a 4 season jacket made from the best leather) Buell jacket with leather lo... | |
|
|
|
 | | | Cooling fan Buell XB 9/12 2003-2010 | €116,00 | | Buell XB 9/12, replacement cooling fan assembly, fits all Buell XB models from 2002-2010
replacement for Y0050.02A8A
Fit's on the following models:
FIREBOLT (XB12R) - 2009-2010
FIREBOLT XB12R - 2004 -2008
FIREBOLT XB9R - (984cc) - 2004-2007
LIGHTNING - (XB12Scg) - 2009-2010
LIGHTNING - (XB12Ss) - 2009-2010
... | |
|
|
All prices are excl. VAT.
