150 products found. Go to page:
|
|
|
 | | Buell XB S throttle cable kit OEM fitting | €69,00 Add to cart | Buell XB12Scg, XB12SS, XB12Stt, XB9S, XB9SL , XB9S throttle cable kit OEM fitting. Fit's allXB12S ,
1x pull cable
1 x push cable
for Oem replacement XB12S , XB12Scg, XB12SS, XB12Stt, XB9S, XB9SL , XB9Sx
2003-2007 models years
| |
|
|
|
 | | Buell Throttle cables with grip XB 9/12 S model | €105,00 Add to cart | Buell XB S set Throttle cables withgrip ( lightning models 2003- 2007 ) to be used with Small starter button switch can be found here ,
cables are ready made to lenght for XB lighting models XB12S, Scg, Ss, Stt,XB9S , XB9Sl, XB9Sx all 2003-2007 models
1x pull cable
1 x push cable
1 x throttle mechanisme + tube
... | |
|
|
|
 | | Universal throttle cable kit 6MM outer, 1.35M | €26,00 Add to cart | Universal throttle cable kit 6MM outer, 1.35M long ( 1x )can be used as push or pull cable
High quality universal throttle cable kit includes 1.35m of standard black conduit with Teflon liner, 1.6m of inner wire and selection of fittings. One end of the inner wire is fitted with a carburettor nipple (EE7). The other end ... | |
|
|
|
 | | Buell throttle with push/pull twist grip | €86,00 Add to cart | throttle push/pull twist gripfor all buell models with 22 mm ( 7/8 ) handle bar
no cables are included !!
Push and Pull twist grip with lightweight die cast alloy body, complete with rotor 37mm in diameter and cable boot
Suitable as an aftermarket replacement for standard throttle body on bikes with Push/Pull throt... | |
|
|
|
 | | |
|
|
 | | Buell S1, S3, M2, X1 Pin sidestand pivot stainless | €24,30 Add to cart | Buell S1, S3, M2, X1 1995-2003 Pin sidestand pivot made out of stainless steel.Circlipcan be found here
Old part number 50113-96Y , L0174.9
PIN, sidestand pivot M2
PIN, sidestand pivot S1
PIN, sidestand pivot S3
PIN, sidestand pivot X1
| |
|
|
|
 | | |
|
|
 | | Buell X1 ,S1, M2, S3 front engine mount | €229,00 €199,00 Add to cart | Billet Aluminum Engine Mount Fit's only OEMX1 ,S1, M2, S3heads on a Tube Frame Buell. Replacement part for stock engine mountand much stronger then OEM. Fit's not on BuellS2, RR1000, RR1200, RS1200.
We higly recommand to replace the follwing parts to
new Motor rubber TM-L1501.8
new headbolts AA0722.1CBZ 2x ... | |
|
|
|
 | | Buell Tube frame rubber strip 90x30x2mm 1 x | €4,90 Add to cart | Buell Tube frame rubber pad 90x30x2mm self adhesive. Clean the surface you want to put it on remove the paper and stick it on. Used on differenTube frame models on different locations look at the pictures below. the size is90 x 30 x (2mm thick) (
The material is the same size as original and 2 mm thick. Quality is better... | |
|
|
|
 | | Buell XB 2003-2010 hidden Brake caliper BRACKET | €89,00 Add to cart | Buell XB 9/12 2003-2010all models hidden Brake caliper bracket in stock
Fit with the following Calippers: Brembo P32For Beringer with a Hole size from 84mm.brembo caliper Gold part number 43256143, black 43256151
Brake caliper holder to modify the rear Brakesystem to a hidden version. No modifications needed, Fits wit... | |
|
|
All prices are excl. VAT.