Search

You are in the category: BUELL TM PRODUCTS
Choose your model: 1125R | 1125CR | M2 | S1 | S2 | S3/S3T | X1 | XB9R | XB12R | XB9S | XB9SX | XB12S | XB12Scg | XB12Ss | XB12STT | XB12SX | XB12X | XB12XP | XB12XT

82 products found. Go to page:

<< Previous  
1   2   3   4   5   6   7   8   9  
Next >>

   
Buell Torque Hammer exhaust (EU 03-07) (USA 03-10)€606,93  Add to cart 
THE TM TORQUE HAMMER EXHAUST FOR ALL European Buell models03-07and USA models from 03-10 models. They are made from RVS (stainless steel) with seperate mounting brackets. IT WILL HAVE THE MOST HP and TORQUE (WITH A GOOD TUNED ECM), COMPARED TO ANYOTHER EXHAUST PRODUCT YOUCANBUYFOR YOUR BUELL. Here is the article of the T...
   
Buell XB 9/12 Torque Hammer exhaust 2008 -2010€606,93  Add to cart 
Buell XB 9/12 Torque Hammer exhaust 2008 -2010 Finally TheTorque Hammer exhaust for the 2008-2010 European models Buell XB9/12 is available to fit with the stockheaders. The main reason we developed this, because a lot of cuctomers cannot swap the stock headers for bigger ones but can fit a slip-on. We still recomm...
   
Buell 1125 Performance Intake stack€96,00 €88,00  Add to cart 
Twin Motorcycles Buell 1125 High Performance intake stacks. THIS IS A SET of 2 pieces for the front and rear cylinder. We achieve 144.2 RWHP and 121 NMof Torque SAECorrected on the rear wheel With stock 1125CR engine with: Twin Motorcycles Intake stack K&N filter TwinMotorcycles fuel map on a stock ECM Stock...
   
Buell XB db-killer Torque Hammer exhaust€15,80 €11,85  Add to cart 
This db-killer is for our Torque Hammer exhaust reduces the exhaust sound. !! drilling a hole in the exhaust is needed !! For the old and the Model Torque Hammer diameter DB killer is 55 mm
   
TM ECM Reflash all models€425,00 €200,00  Add to cart 
We offer the service to reprogram the stock Buell ECM without going to the dyno. For the older models we can e-mail you the file to program it with ECMSPY, and we support how to do that. For the newer models Buell we do that online when your bike is connected to the internet with us. After 11years of dynowork we know it ...
   
Stage 1 Buell XB9/12 2008-2010 ECM€716,76  Add to cart 
When you already have a Exhaust (we hope you buy our Torque Hammer for the Buell XB 9-12 and K&N Air filter for your Buell XB9/12 2008-2009-2010 model, and you only want too have a good running Bike, Buy this ECM with our fuel and ignition map inside. I tested this ECM with all the big exhaust manufacturers, and with al...
   
Stage 1 Buell 1125R and 1125CR ECM€716,76  Add to cart 
When you already have a Exhaust (we hope you buy our Torque Hammer for the 1125) and Air filter for your Buell 1125R or 1125CR, and you only want too have a good running Bike, Buy this ECM with, our fuel and ignition map inside. I tested this ECM with all the big exhaust manufacturers, mounted on our test bike in our dyno r...
   
Dyno all Buell XB and 1125, XR1200, Sportster€600,00  Add to cart 
The remap of All new XB 2008-2009-2010 and 1125 Models is 1 full day job on the dyno. All the problems with jurking on low RPM, not smooth on the throttle, not delivering the power the engine can make are gone. We give a 100% money back guarantee, if you are not satisfied. Mail us for the possibilities.
   
TM Buell X1 Undertray€282,00  Add to cart 
Twin Motorcycles Buell X1 Fiberglas Under tray. High quality, made by one of the best composite builders in Holland. Perfect fitting. The under tray comes without holes so you can modify it yourself to your own wishes. There are cut out markings for flush mounted indicator lights, tail light and the original seat lock. T...
   
TM made Buell Bar End Vibration dampersOn request 
Twin Motorcycles Bar end Vibration dampers Got dead fingers after a ride ? Consider our Home Made Vibration dampers. - They are made out of Heavy Stainless steel so they also work when you crash. - Mounting them is easy and they can be mounted very secure and tight through the special mounting mechanism. - They specia...
All prices are excl. VAT.