79 products found. Go to page:
|
|
|
 | | |
|
|
 | | | Buell Torque Hammer exhaust (EU 03-07) (USA 03-10) | €499,00 | | THE TM TORQUE HAMMER EXHAUST FOR ALL European Buell models03-07and USA models from 03-10 models. They are made from RVS (stainless steel) with seperate mounting brackets. IT WILL HAVE THE MOST HP and TORQUE (WITH A GOOD TUNED ECM), COMPARED TO ANYOTHER EXHAUST PRODUCT YOUCANBUYFOR YOUR BUELL.
Here is the article of the T... | |
|
|
|
 | | | Buell XB 9/12 Torque Hammer exhaust 2008 -2010 | €499,00 | | Buell XB 9/12 Torque Hammer exhaust 2008 -2010
Finally TheTorque Hammer exhaust for the 2008-2010 European models Buell XB9/12 is available to fit with the stockheaders.
The main reason we developed this, because a lot of cuctomers cannot swap the stock headers for bigger ones but can fit a slip-on.
We still recomm... | |
|
|
|
 | | | Buell 1125 Performance Intake stack | €90,00 | | Twin Motorcycles Buell 1125 High Performance intake stacks. We achieve 144.2 RWHP and 121 NMof Torque SAECorrected on the rear wheel With stock 1125CR engine with:
Twin Motorcycles Intake stack
K&N filter
TwinMotorcycles fuel map on a stock ECM
Stock exhaust with CAT
Look below in this articlefor more inf... | |
|
|
|
 | | | Buell XB db-killer Torque Hammer exhaust | €15,80 €11,85 | | This db-killer is for our Torque Hammer exhaust reduces the exhaust sound. !! drilling a hole in the exhaust is needed !!
For the old and the Model Torque Hammer
| |
|
|
|
 | | | TM ECM Reflash all models | €425,00 €200,00 | | We offer the service to reprogram the stock Buell ECM without going to the dyno. For the older models we can e-mail you the file to program it with ECMSPY, and we support how to do that. For the newer models Buell we do that online when your bike is connected to the internet with us.
After 11years of dynowork we know it ... | |
|
|
|
 | | | Stage 1 Buell XB9/12 2008-2010 ECM | €750,00 | | When you already have a Exhaust (we hope you buy our Torque Hammer for the Buell XB 9-12 and K&N Air filter for your Buell XB9/12 2008-2009-2010 model, and you only want too have a good running Bike, Buy this ECM with our fuel and ignition map inside. I tested this ECM with all the big exhaust manufacturers, and with al... | |
|
|
|
 | | | Stage 1 Buell 1125R and 1125CR ECM | €750,00 | | When you already have a Exhaust (we hope you buy our Torque Hammer for the 1125) and Air filter for your Buell 1125R or 1125CR, and you only want too have a good running Bike, Buy this ECM with, our fuel and ignition map inside. I tested this ECM with all the big exhaust manufacturers, mounted on our test bike in our dyno r... | |
|
|
|
 | | | Dyno all Buell XB and 1125, XR1200, Sportster | €600,00 | | The remap of All new XB 2008-2009-2010 and 1125 Models is 1 full day job on the dyno. All the problems with jurking on low RPM, not smooth on the throttle, not delivering the power the engine can make are gone. We give a 100% money back guarantee, if you are not satisfied. Mail us for the possibilities.
| |
|
|
|
 | | |
|
All prices are excl. VAT.
