105 products found. Go to page:
|
|
|
 | | | Buell XB9/12 Seal fuel pump outlet 2004-2010 | €3,36 Add to cart | | Buell XB9/12 Seal fuel pump outlet 2004-2010 ( 1x )
seal for thefuel pump outlet for all XB9 and XB12 R and S and X models from 2004 till 2010. and on the Fuel injected Tube frame models
This seal need maintenance and can be oneof the causes the bike will run very bad.
replacement for the P0164.K
| |
|
|
|
 | | | Buell S1, S3, M2 X1 Bronze shifter bushing set | €16,03 Add to cart | | Shifter bearing bushing set bronze
Buell S1
Buell S3
Buell M2
BuellX1
End the ratteling shift lever on your Buell The OEM nylon bearings have become obsolete, and these would be a perfect solution. Made to fit the old style shifters as replacement for partnumber N0513.2A
Oil-Embedded Flanged Sleeve Bearing with ... | |
|
|
|
 | | | Front isolator set 95-02 Tube Buells and Blast | €70,86 Add to cart | | Twin Motorcycles Front Isolator motor Mount for 95'-02' Tube frame Buells and Blast models. After HD made this part obsolete, we made a set available with the original manufacturer isolator.
This is the new design released in early 2010 to fix the problems that occurred when HD re-engineered the part without cons... | |
|
|
|
 | | | TM Buell front fork service set 41 mm (1x ) | €54,43 Add to cart | | TM Buell front fork serviceset 41 mm for 1 leg.
all you need to overhaul your front fork
includes for 1 leg;
Buel low friction seal set ( dust and oil )
O-rings for top cap assembly ( XB )
inner and outer guide bushings
crush washer for the dampening rod
oil sealholder clip
for Buell XB9-XB12 2003-20... | |
|
|
|
 | | | Buell S1 and M2 seat screw | €39,00 €29,00 Add to cart | | Buell S1 and M2 seat screw
Used on Buell S1 andM2 models
made from Stainles steel knurled with larger outer diameter to turn it loose by hand
| |
|
|
|
 | | |
|
|
 | | | Buell XB 9/12 1125 R/CR Tube frame bronze bushing | On request | | Buell XB 9/12 03-10, Buell 1125 R/CR 08-10,Buell Tube frame 01-up, set bronze pedal bushings ( 2x bushings ).
Theselast longer then the plastic N0513.T bushings, and is a direct replacement.
Can be used on shift or brake lever for Buell XB 9/12 and1125 R/CR Brake lever
Tube frame models 2001- up ( new model Shift l... | |
|
|
|
 | | | Buell XBS throttle cable kit OEM fitting | €84,00 Add to cart | | Buell XB12Scg, XB12SS, XB12Stt, XB9S, XB9SL , XB9S throttle cable kit OEM fitting. Fit's allXB12S ,
1x pull cable
1 x push cable
for Oem replacement XB12S , XB12Scg, XB12SS, XB12Stt, XB9S, XB9SL , XB9Sx
2003-2007 models years
| |
|
|
|
 | | | Buell Throttle cables with grip XB 9/12 S model | €97,00 Add to cart | | Buell XB S set Throttle cables withgrip ( lightning models 2003- 2007 ) to be used with Small starter button switch can be found here ,
cables are ready made to lenght for XB lighting models XB12S, Scg, Ss, Stt,XB9S , XB9Sl, XB9Sx all 2003-2007 models
1x pull cable
1 x push cable
1 x throttle mechanisme + tube
... | |
|
|
|
 | | | Buell S1, S3, M2, X1 Pin sidestand pivot stainless | €24,30 Add to cart | | Buell S1, S3, M2, X1 1995-2003 Pin sidestand pivot made out of stainless steel.Circlipcan be found here
Old part number 50113-96Y , L0174.9
PIN, sidestand pivot M2
PIN, sidestand pivot S1
PIN, sidestand pivot S3
PIN, sidestand pivot X1
| |
|
|
All prices are excl. VAT.
