161 products found. Go to page:
|
|
|
 | | | Buell XB 9/12 Torque Hammer exhaust 2008 -2010 | On request | | Buell XB 9/12 Torque Hammer exhaust 2008 -2010
CHIN SPOILER KIT CAN BE ORDERED HERE
soundclip 1: CLICK HERE
soundclip 2: CLICK HERE
The main reason we developed this, because a lot of cuctomers cannot swap the stock headers for bigger ones but can fit a slip-on.
We still recommend the setup with the Bigger XB... | |
|
|
|
 | | | Buell 1125 Performance Intake stack | €109,00 Add to cart | | Twin Motorcycles Buell 1125 High Performance intake stacks. THIS IS A SET of 2 pieces for the front and rear cylinder. We achieve 144.2 RWHP and 121 NMof Torque SAECorrected on the rear wheel With stock 1125CR engine with:
Twin Motorcycles Intake stack
K&N filter
TwinMotorcycles fuel map on a stock ECM
Stock... | |
|
|
|
 | | | TM ECM Reflash all models | €200,00 €100,00 Add to cart | | We offer the service to reprogram the stock Buell ECM without going to the dyno. For the older models we can e-mail you the file to program it with ECMSPY, and we support how to do that. For the newer models Buell we do that online when your bike is connected to the internet with us.
After 11years of dynowork we know it ... | |
|
|
|
 | | | Stage 1 Buell XB9/12 2008-2010 ECM | On request | | When you already have a Exhaust (we hope you buy our Torque Hammer for the Buell XB 9-12 and K&N Air filter for your Buell XB9/12 2008-2009-2010 model, and you only want too have a good running Bike, Buy this ECM with our fuel and ignition map inside. I tested this ECM with all the big exhaust manufacturers, and with al... | |
|
|
|
 | | | Stage 1 Buell 1125R and 1125CR ECM | On request | | When you already have a Exhaust (we hope you buy our Torque Hammer for the 1125) and Air filter for your Buell 1125R or 1125CR, and you only want too have a good running Bike, Buy this ECM with, our fuel and ignition map inside. I tested this ECM with all the big exhaust manufacturers, mounted on our test bike in our dyno r... | |
|
|
|
 | | | Dyno all Buell XB and 1125, XR1200, Sportster | €600,00 Add to cart | | The remap of All new XB 2008-2009-2010 and 1125 Models is 1 full day job on the dyno. All the problems with jurking on low RPM, not smooth on the throttle, not delivering the power the engine can make are gone. We give a 100% money back guarantee, if you are not satisfied. Mail us for the possibilities.
| |
|
|
|
 | | | TM Oil Catch Can Tube Buell, XR1200 and Sportster | On request | | Twin Motorcycles, Oil Catch Can. We proudly present a new oil catch can for the old Tuber Buell models and allSportster and XR1200 models.
We looked at the different options that are currently on the market, but they where not the solution we where searching for. We wanted to have: - nice design - multifunctional in posi... | |
|
|
|
 | | | TM Buell X1 Undertray | €282,00 Add to cart | | Twin Motorcycles Buell X1 Fiberglas Under tray.
High quality, made by one of the best composite builders in Holland. Perfect fitting. The under tray comes without holes so you can modify it yourself to your own wishes. There are cut out markings for flush mounted indicator lights, tail light and the original seat lock. T... | |
|
|
|
 | | | TM made Buell Bar End Vibration dampers | On request | | Twin Motorcycles Bar end Vibration dampers Got dead fingers after a ride ? Consider our Home Made Vibration dampers. - They are made out of Heavy Stainless steel so they also work when you crash.
- Mounting them is easy and they can be mounted very secure and tight through the special mounting mechanism.
- They specia... | |
|
|
|
 | | | Dyno 1125R/CR Race ECM programming | €650,00 Add to cart | | Our core business is programming the Buell ECM in our Dyno room for our customers. For the 1125R and the 1125CR it’s a must to do this, because the bike is running very lean. We are testing all of the aftermarket exhaust and setups for the Buell 1125 and make new fuel maps for the 1125. We now offer the s... | |
|
|
All prices are excl. VAT.
