|62 products found. Go to page:|
|Heat shrink clutch cable leak repair 20 cm||€5,00 Add to cart |
|Heat shrink clutch cable leak repair 20 cm
fix you oil sweating clutch cable , or protect for outer cable rubbing to chin spoilers ect
shrinks from 19 mm to 6 mm with heat activated glue layer inside , so the fix will be oil tight
sold in a lenght off 20 cm
slide over the cable and heat with heat gun
|Buell Tube frame 1st gear kit close ratio 2.61||€255,00 Add to cart |
|Andrews 1e gear kit close ratio 2.61inclused 1e gear main shaft and 1e gear countershaft
( stock ratio is 2.779 )give a better to use 1e gear, ( + 7 mph / + 11 Km/h )
and the step to 2e gear is smaller
for all Buell Tube frame models and Sportster 91-03
can be used for replacement for gear35762-89A
|Buell XB 9/12 2003-2010 27 tooth front pully||€69,00 Add to cart |
|The Twin Motorcycles Steel front pulley 27 tooth. The weight is same as stock only a better quality steel. The outside part is painted black to avoid corrosion.
Will fit all XB9 2003- 2010and all XB12 models 2003-2010
Fit's all tube frame Buell models ( US gearing )
Fit's Sportster models 91-2003
|INSPECTION COVER, chain||On request |
|please order514143 as replacement
Obsolete part limited supley
INSPECTION COVER, chain
INSPECTION COVER, chain 96*-S1
INSPECTION COVER, chain 99*-S3
INSPECTION COVER, chain 2000-X1
INSPECTION COVER, chain (polished) 2000*-M2
INSPECTION COVER, clutch (polished) 2000-S3/S3T
|Buell Tube frame belt tensioner||€269,00 Add to cart |
|Buell Tube frame belt tensioner.
Belt tensioner developed to compensate lengthen on the drive belt throughout swing-arm movement, the reduced stress and shock loads not only benefit and prevent premature lengthen of the belt but also and above all reduce stress from wheel and gearbox output bearings.
Fits all Buell tu... |
|Buell Tube frame 530 O-Ring, 48/23 R/F Chain kit||On request |
|Buell Tube frame 95-02 Chain Conversion kits
48-23 with 530 chain
for all 95-02 Buell
Chain Conversion Kits- includes all items necessary to convert your belt driven Tube frame Buell to Chain Drive.
use the 530 O-ring chain kit (shown) for maximum durability.
use the 520 non O-ring chain for ... |
|BDL blank pully 61T 1-1/8 wide, 14 mm pitch||€349,98 Add to cart |
|Blank pully 61 Teeth 1-1/8 wide, 14 mm pitch
This blank pully is for custom jobs, to mill for Non Oem wheels to fit with a belt drive.
!!! THIS PART IS NOT FITTING ON A STOCK WHEEL Itneeds to be made fitted !!
The center hole 50 mm, thebolt holes are 11,6 mm.ET is 82,55 x 5 ( 3,25"x 5 ).
All prices are excl. VAT.