36 products found. Go to page:
|
|
|
 | | Damper Rod Bleed Tool, 5 in 1 | €39,00 Add to cart | Damper Rod Bleed Tool, 5 in 1
for all Buell models for suspention service
Tool design allows for effortless retrieval of damping rod after spring installation
Perfect for working on Kayaba, Showa and WP inverted forks
One piece design means no lost parts
Rod includes downward facing bleed port to prevent oil s... | |
|
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | Buell front fork Oil level tool | €25,21 Add to cart | Buell front fork Oil level tool. Forall Buell and XR1200 and Sportster models
For checking and adjusting the oil level on all conventional and single chamber cartridge forks
Adjustable ring will measure oil levels from 0 to 300mm in 0.5cm increments
Syringe has a capacity of 60ml
Can be used on motorcycles equippe... | |
|
|
|
 | | Ringer Fork Seal Driver, 46-47mm | €46,60 Add to cart | Ringer Fork Seal Driver, 46-47 mm *
Buell 1125 models and XB12X/XP 2008 up models
Fits 46-47mm fork legs
Innovative design makes tool easier and safer to use than old fashioned pin aligned drivers
Anodized aluminum locking ring features knurled finish for secure no-slip grip and positively locks body halves together... | |
|
|
|
 | | Handy Buell Tool Mini Ratchet with T27 bit | On request | Mini Ratchet with T27 bit
Small and handy reverseable ratchet for1/4 size bits
and fixed 1/4 size on the other end ,
for unscrewing XB airscoops for exampleor front chin spoiler screws on your exhaust
we include a T27 bit as most common on on the XB
but any 1/4 bit will fit
| |
|
|
|
 | | Buell XB and Buell 1125 axle tool | €10,25 Add to cart | Axle tool for all Buell XB 9/12 and all Buell 1125R and 1125CR models,very usefulltool for your tool box.
For all XB and 1125 front and rear wheel and Swing arm axles 2003-2010
size 22mm ( 7/8 ) with 1/2 inch connection
| |
|
|
|
 | | Buell Suspension tool Front and Rear | €442,00 Add to cart | Buell Suspension tool for Front Fork and and RearSuspention disassembeling.All in one Suspention tool.
USed for All Buell models, all Sportster models and all XR1200 models.
The best solution for the disassembling of the springs from mono or standard rear shock absorbers, or replace springs and cartridges from front f... | |
|
|
All prices are excl. VAT.