Motoscope Tiny Speedster Speedometer Black Bezel
The motoscope tiny speedster is a small, analogue speedometer with appealing vintage design.
The instrument is technically identical to the motoscope tiny.
The dial is based on the streamline designs of the 40's and 50's. The colour is a matching 'warmer' white.
The indicator shape is matched to the design of the dial and made from brushed stainless steel.
The high quality aluminium casing is turned from solid metal and its surface is anodized black.
The casing is 100% water-tight and resistant to vibrations.
Dial and display
The analogue dial in contrasting black and white is indirectly illuminated by white LEDs.
The innovative LED display is hidden behind the black part of the dial and only visible through the dial while operating,
not when switched off!
The LED luminosity is automatically adjusted to achieve optimal readability in dark,
sunlight and dawn conditions.
If the speed exceeds the 200 km/h on the analogue scale,
it is automatically displayed in the LED display. The maximum speed is recorded as well
The 4 indicator lights (blue, red and 2 x green) are also integrated into the dial.
These lights are only visible when operated, too.
You can toggle between the different informations on the LED display by operating the supplied menu push-button or e.g.
the headlight flasher push-button on the handle bar.
Default value on the display is the time. If needed,
a short actuation of the push-button will display the values of total distance, day trip, on-board voltage etc.
All functions are easy to operate with the push-button, e.g. day trip, reset or the like.
Default settings or recorded values are of course stored even with the power supply switched off.
The motoscope tiny is easy to install with the two M3 threaded holes on the back side.
Connection and sensors
The detailed installation and operating instructions, help with the connection of instrument even for users,
without any previous experience in handling the vehicle's electrical system.
The supplied speedometer sensor in stainless steel is very small (M5/23 mm) and therefore easy to hide.
The sensor can be easily installed on front or rear wheel with the connector cable (1.5 m long).
This allows for the easy conversion of an originally mechanical speedometer drive on a motorbike.
The motoscope tiny is compatible with various original speedometer sensors (dry reed contact and proximity sensors)
of the motorbike manufacturers. In this case, the terminals have to be connected only and the mechanical sensor installation will be completely obsolete.
An intelligent 'Teach Function' allows for the easy calibration of the speedometer - even on vehicles with transmission sensors, e.g. Harley Davidson (TM).
For use on a XR1200 ( X ) use the M-bus connectors
Instrument with approx. 75 cm connector cable, mini push-button, 2 removable fuses,
9 cable end connectors,
speedometer sensor (M5 x 0,5 fine-pitch thread, stainless steel, IP 68) with 150 cm connector cable,
2 powerful neodymium mini magnets, 2 mounting screws M3 with washer, 2 diodes for pairing of turn signals,
detailed installation and operating instructions.