|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | | Buell Xb and Tube frame 27T front pulley USED | €126,50 - Add to cart | | Buell Xb and Tube frame 27T front pulley USED
for Buell XB 2004 -2010 (27 T )
and all Tube frame models ( 27 T )
used part in good condition, comes with nut and nut retainer
OEM partnumber 40288-95
only 1 availeble !!
| |
|
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | | BDL blank pully 61T 1-1/8 wide, 14 mm pitch | €292,98 - Add to cart | | Blank pully 61 Teeth 1-1/8 wide, 14 mm pitch
This blank pully is for custom jobs, to mill for Non Oem wheels to fit with a belt drive.
!!! THIS PART IS NOT FITTING ON A STOCK WHEEL Itneeds to be made fitted !!
The center hole 50 mm, thebolt holes are 11,6 mm.ET is 82,55 x 5 ( 3,25"x 5 ). | |
|
|
|
 | | | Pulley lock tool | €143,55 - Add to cart | | Jims Pulley Lock Tool
Use this tool to lock the final drive sprocket when
removing and installing the sprocket nut.
Use on all Sportsters® 1991-present (28T
and 29T only).
Use on all Buell tube frame models 1994-2002 (28T and 29T only). | |
|
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | | Buell XB, S1,S2,S3,M2,X1 Sportster Rear belt | €158,37 - Add to cart | | Buell XB, S1,S2,S3,M2,X1 Sportster Rear beltPanther rear belt replacement belt.
128 Teeth x 14 mm pitch x 1 1/8 inch (28 mm ) wide
for all;
For all Tube Frame Buell'sS1, S2, S3, M2, X1with OEM pully
Buell XB 9/12 S, R, Scg, Sx models 2004-2010
Buell tube frame models
Sportster 1991-2003 models with 61T rear pulley
Rear Belt Drive 128T for all XB12S, SX and Scg models
Improved RPP™ Panther® Design
Feature ULTRA-CORD™ tensile membe... | |
|
|
|
 | | |
|
|
 | | |
|
|
 | | | Buell Sportster Clutch spring tool | €67,77 - Add to cart | | Motion Pro Clutch spring tool
very usefull tool to service or replace your clutch,
to relieve the diaframe spring tension
For all Sportster 91- up
for all Buell tube frame models 94-2001
for all Buell Xb 2003-2010
For all XR1200 ( X ) 2008- up | |
|
|
|
 | | | Buell Sportster XR1200 XB Clutch spring | €25,98 - Add to cart | | Sportster XR1200 Clutch spring ( 360 LBS )
for all Sportster (91 & later) and Buell (91-02 )
performance upgrade for XR1200 ( X ) ( stock spring = 320 LBS )
performance upgrade for Buell Xb 2006-up (stock spring = 320 LBS ) | |
|
|
|
 | | | Buell Harley shifter spring lever extention | €1,93 - Add to cart | | Buell Harley shifter spring lever extention
for the shifter mechanisme,
Xb for all models,
Sportster all 2004 and up models
XR1200 ( X ) all 2008 and up models
old partnumber 34491-02
sold per piece, ( 2 in every bike ) | |
|
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | | Buell Tube frame shifter rod | €32,06 - Add to cart | | Buell Tube frame shifter rod
replaces part numbers 33824-99Y and 33753-95Y
THUNDERBOLT - S2 1995/1996
LIGHTNING - S1 1996 - 1998
CYCLONE - M2 1997 -2000
LIGHTNING - X1 1999 - 2000
THUNDERBOLT - S3 1999 - 2000 | |
|
|
|
 | | | Buell tube frame Jam nut shifter rod | €0,58 - Add to cart | | Old number: 7534Y
Buell tube frame Jam nut shifter rod
sold per piece
THUNDERBOLT - S2 1995/1996
LIGHTNING - S1 1996 - 1998
CYCLONE - M2 1997 -2000
LIGHTNING - X1 1999 - 2000
THUNDERBOLT - S3 1999 - 20020 | |
|
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | | 27 teeth front pully for tube en XB12/9 RED | €228,60 - Add to cart | | Aluminuim billet drive pulley temperate and surface hardned. Special steel galvanised inner part changeable.
27 teeth for all XB models 2004 and up color Red
This light weight pulley replace stock.
Available also 29 tooth for tube frame models !!
Totally stainless. Reduced weight at 835 gr. for 29 tooth, at 680 gr. for 27 tooth. | |
|
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | | Buell 1125R 1125CR Clutch Slave Cylinders | €134,98 - Add to cart | | Buell 1125R and 1125CR aftermarket Clutch Slave Cylinders with lifetime warranty.Replacement clutch slave cylinder for the Buell 1125R and Buell 1125CR Rotax motor. Designed to improve the efficiency and operation of the original clutch unit. The enhanced piston design reduces the heaviness of the original clutch action and brings much relief to aching arms.
The internal piston design, seals and the addition of linear bearing have drastically enhanced it ... | |
|
|
|
 | | | Buell 1125 Clutch Slave Cap 2009-2010 | €60,94 - Add to cart | | Buell 1125R and 1125CROberon Performance engine protection cap can be purchased without the need to purchase any un-wanted part. This product will replace the original item by simply clipping in place, the original cap should pop off with little gentle prising from underneath. The Oberon cap is held in place with a 3mm Nitile 'O' ring, the cap also has a small breather hole so any condensation can escape as the engine warms to the desired temperature. It i... | |
|
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | | Buell 1125 High performance clutch kit | €168,99 - Add to cart | | Buell 1125 High performance clutch kit. This kit consists of 9 friction plates, 10 steel plates, set off 6 x heavy duty springs. The Clutch springs are shorter than Original but 12% stonger at working height, installation and torque spec's are the same as the stock stock.
For a good working of the Engine and clutch we recommand Motul 10W-40 | |
|
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | | Buell XB Rod End shift linkage | €15,35 - Add to cart | | Buell XB ROD END shift linkage, male left hand thread. Sold per piece.
Used on the following models:
2003 FIREBOLT - XB9R 2003
FIREBOLT - (XB12R) - 2009
FIREBOLT - (XB12R) - 2010
FIREBOLT XB12R - (1203cc) - 2004
FIREBOLT XB12R - (XB12R) - 2005
FIREBOLT XB12R - (XB12R) - 2006
FIREBOLT XB12R - (XB12R) - 2007
FIREBOLT XB12R - (XB12R) - 2008
FIREBOLT XB9R - (984cc) - 2004
FIREBOLT XB9R - (XB9R) - 2005
FIREBOLT XB9R - (XB9R) - 2006
FIREB... | |
|
|
|
 | | |
|
|
 | | |
|
|
 | | | Buell, XL Gear 3e countershaft | €176,07 - Add to cart | | Buell, XL Gear 3e countershaft
for all Buell tube frame models
Buell XB 2003-2005 models
XL 95-2005
sold per piece
please ask us if ou have difficulty in selecting the right gear for your bike | |
|
|
|
 | | | Buell, XL Gear 3e mainshaft | €168,24 - Add to cart | | Buell, XL Gear for 3e gear on mainshaft
and some models 2e gear countershaft
sold per piece
Buell Tube frame all models
Buell XB 2003-2005
XL 95-2005
| |
|
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | | Buell Tube and Sportster GEAR SETS close ratio | €1.009,00 - Add to cart | | Buell Tube models 1994-2002 and Sportster 1991-2005
Andrews 5 speed gear set. close ratio 1e gear (2.605 )
Gears are made from high-nickel alloy steel that is heat-treated and shot-peened for maximum durability and strength
Where applicable, drive dogs have milled lead-in ramps to improve shifting and reduce wear Sets include gears, mainshaft and countershaft
| |
|
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | | Buell XB 9/12 and Sportster Gear fith-mainshaft | €186,31 - Add to cart | | Buell, Gear fith-mainshaft.
Fit's on the following models:
FIREBOLT - (XB12R) - 2009-2010
FIREBOLT XB12R - (XB12R) - 2006-2008
FIREBOLT XB9R - (XB9R) - 2006-2007
LIGHTNING - (XB12Scg) - 2009
LIGHTNING - (XB12Scg) - 2010
LIGHTNING - (XB12Ss) - 2009
LIGHTNING - (XB12Ss) - 2010
LIGHTNING - (XB9SX) - 2009
LIGHTNING CITY X - (XB12SX) - 2010
LIGHTNING CITY X - (XB9SX) - 2010
LIGHTNING CITYX XB9SX - (XB9SX) - 2006-2008
LIGHTNING LONG XB12Ss ... | |
|
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | | Buell Tube and Sportster Primary cover, Silver | €322,51 - Add to cart | | Buell M2, X1, S3 and Sportster 883 and 1200 Primary cover, Silver
Was standard on the following models:
1997 CYCLONE - M2 1997
1997 CYCLONE - M2 1997/1998
1998 1200 SPORT EVOLUTION - XLH1200S 1998 - (XL1200S) - 1998
1999 1200 CUSTOM - XLHC 1999 - (XL1200C) - 1999
1999 883 CUSTOM - XL883C 1999 - (XL883C) - 1999
1999 CYCLONE - M2 1999
2000 1200 SPORT - XLHS 2000 - (XL1200S) - 2000
2000 883 CUSTOM- XL883C 2000 - (XL883C) - 2000
2000 CYCLONE... | |
|
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | | Buell XB Red Pully Cover | €86,66 - Add to cart | | So you have decided to get rid of the bulky front pulley cover, or you want to do what we did and cut some holes in it to reveal the pulley underneath? Problem is, the pulley is rusty and not very attractive. Here is the solution. This pulley cover fits using the two pulley locking bolts and covers the rusty stock pulley face. Now anodised in red with stainless steel allen bolt deatiling this certainly looks 100% better.
!!! will only fit with Free Spir... | |
|
|
|
 | | | Buell XB new red belt tensioner | €122,00 - Add to cart | | The stock Buell belt tensioner is designed to keep the belt under constant tension, except it doesnt When the suspension is completely unloaded, such as when pulling stoppies or even braking hard, the tension is increased to an alarming degree, which can actually damage belts, wheel bearings and pulley bearings. This spring loaded item is designed to maintain a tension of 10.5kg (depending on model) regardless of swingarm position and will help lengthen be... | |
|
|
|
 | | | Buell XB Belt tensioner Hot Yellow | €122,00 - Add to cart | | The stock Buell belt tensioner is designed to keep the belt under constant tension, except it doesn’t! When the suspension is completely unloaded, such as when pulling stoppies or even braking hard, the tension is increased to an alarming degree, which can actually damage belts, wheel bearings and pulley bearings. This spring loaded item is designed to maintain a tension of 10.5kg (depending on model) regardless of swingarm position and ... | |
|
|
|
 | | | Buell XB Belt tensioner Blue | €122,00 - Add to cart | | The stock Buell belt tensioner is designed to keep the belt under constant tension, except it doesn’t! When the suspension is completely unloaded, such as when pulling stoppies or even braking hard, the tension is increased to an alarming degree, which can actually damage belts, wheel bearings and pulley bearings. This spring loaded item is designed to maintain a tension of 10.5kg (depending on model) regardless of swingarm position and ... | |
|
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | | Buell XB Pully Cover Black | €86,66 - Add to cart | | So you have decided to get rid of the bulky front pulley cover, or you want to do what we did and cut some holes in it to reveal the pulley underneath? Problem is, the pulley is rusty and not very attractive. Here is the solution. This pulley cover fits using the two pulley locking bolts and covers the rusty stock pulley face. Anodised black with stainless steel allen bolt deatiling this certainly looks 100% better.
!!! will only fit with Free Spirits p... | |
|
|
|
 | | | Alto carbon clutch plate kit XB and XR1200 | €173,45 - Add to cart | | Alto, carbon based clutch plate kit XB
advised for use with the STM slipper clutch
and as heavy duty replacement in all Xb models
and XR1200 (x ) models
we advice to use Red line D4 ATF fluid with use off this clutch kit, | |
|
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | | Buell XB new model belt tensioner Silver | €122,00 - Add to cart | | The stock Buell belt tensioner is designed to keep the belt under constant tension, except it doesn’t! When the suspension is completely unloaded, such as when pulling stoppies or even braking hard, the tension is increased to an alarming degree, which can actually damage belts, wheel bearings and pulley bearings. This spring loaded item is designed to maintain a tension of 10.5kg regardless and will help lengthen belt and bearing life. ... | |
|
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | |
|
|
 | | | Buell XB locknut 1/2-13 X 15/32 X 7/8 self-sealing | €10,27 - Add to cart | | Buell XB, Tube BuellandSportster locknut 1/2-13 X 15/32 X 7/8 self-sealing. Used as lock nut for the primary chain tensioner. Sold per piece.
Used on the following models:
1995 THUNDERBOLT - S2 1995/1996
1996 LIGHTNING - S1 1996/1997
1997 CYCLONE - M2 1997/1998
1997 THUNDERBOLT TOURING S3T 1997
1998 LIGHTNING - S1 1998
1999 CYCLONE - M2 1999
1999 LIGHTNING - X1 1999
1999 THUNDERBOLT - S3 1999
2000 BLAST - P3 2000
2000 CYCLONE - M2 2000 ... | |
|
|
|
 | | | Buell XB, Tube, XR1200, Sportster Main Shaft nut | €20,55 - Add to cart | | Buell XB, Tube, XR1200, Sportster Main Shaft nut to mount the clutch hub to the mainshaft(left hand threath).
Used op the following models:
1200 CUSTOM - (XL1200C) - 2010
1200 LOW - (XL1200L) - 2006-2010
1200 NIGHTSTER - (XL1200N) - 2010-2011
1200C CUSTOM - (XL1200C) - 2005-2009
1200N NIGHTSTER - (XL1200N) - 2007-2009
1995 THUNDERBOLT - S2 1995/1996
1996 LIGHTNING - S1 1996/1997
1997 1200 CUSTOM EVOLUTION - XLHC 1997 - (XL1200C) - 1997
19... | |
|
|
|
 | | | Buell XB chain conversion kit for street use 21-50 | €597,00 - Add to cart | | Same as the kit 207570 but with one steel 50 teeth rear sprockets instead of the race kit alloy versions.
The bike will have almost the same final drive ratio as the original belt transmission.
All parts are available separately as spares to customers who have purchased the kit. 21 teeth front sprocket | |
|
|
|
 | | | Buell XB new model belt tensioner Black | €122,00 - Add to cart | | The stock Buell belt tensioner is designed to keep the belt under constant tension, except it does not! When the suspension is completely unloaded, such as when pulling stoppies or even braking hard, the tension is increased to an alarming degree, which can actually damage belts, wheel bearings and pulley bearings. This spring loaded item is designed to maintain a tension of 10.5kg regardless and will help lengthen belt and bearing life. Extensively tested... | |
|
|
|
 | | | XB9R/S Extra Torque Kit for 2002-2003 models only | €583,00 - Add to cart | | aluminium billet drive and rear pulley kit designed to improve torque and acceleration. Surface hardened for long life and hard anodised in dark grey. Retains standard belt and tensioner or can use our sprung tensioner assembly. Fits 2002-2003 XB9 Models ONLY. | |
|
|
|
 | | |
|
|
 | | |
|
|
 | | | 27 teeth front pully for tube en XB12/9 black | €228,06 - Add to cart | | Aluminuim billet drive pulley temperate and surface hardned. Special steel galvanised inner part changeable.
27 teeth for all XB models 2004 and up
This light weight pulley replace stock.
Available also 29 tooth for tube frame models !!
Totally stainless. Reduced weight at 835 gr. for 29 tooth, at 680 gr. for 27 tooth. | |
|
|
|
 | | | BUELL XB9 2002-2003 drive belt | €233,85 - Add to cart | | BUELL, new stronger model belt. Latest replacement for the old type belt. Fits all XB9 2002 and 2003 models.
Works only on original pulley.
The old partnumber was: G0500.02A8F Tooth distance is 11 mm. | |
|
|
|
 | | | Buell XB9/12, X1 S1 S3 M2 128 Tooth drive belt | €233,85 - Add to cart | | Buell XB9/12 04 up, Tube models X1 S1 S3 M2 and Sportster 1991-2004 128 Tooth Drive belt.drive belt
Fit's 2004-2010 BUELL XB R/S series With 52 inch wheelbase
OEM BUELL GOODYEAR HYBREX FLEXTEN 128 TOOTH FINAL DRIVE BELT
( G0500.1AAH )
ALSO FITS 95-02 X1 / S1 / S2 / S3 / S3T / M2
UPGRADE FOR ALL TUBE FRAME MODELS & 91-04 XL SPORTSTER
OLD PART ( # G0500.1AAG )( # G0500.1AAE )
DOES NOT FIT 06 LATER XB12X / XB12XT / XB12Ss / XB12TT / 05 LA... | |
|
|
|
 | | |
|
|
 | | |
|
|
 | | | Buell Pullycover XB9 and Xb12 | €122,00 - Add to cart | | Buell RRC pully cover. The three-dimensional aluminium pulley cover produced on high-tech CNC machines covers the front as well as the top of the drive belt. The front part of the cover has a slightly different colour and comes in black or silver, presenting a striking appearance. It is possible to assemble the pulley cover with or without the original drive belt casing. We highly recommend the Pulley Cover in Aluminium-black, especially for all Buell XB 1... | |
|
|
|
 | | |
|
|
 | | | Buell Silver Pullycover Tube frame models | €84,56 - Add to cart | | CNC milled pulley cover for all Buell Tube frame models only. It is good looking and fits exactly. It covers also frame and motor opening upside. It fits without changes on the original fitting points. | |
|
|
|
 | | | Buell XB Rizoma Billet Front Pully Cover | €196,71 - Add to cart | | Manufactured from billet aluminium with clear perspex panels covering the pulley. Also included is an anodised black pulley skin that can be seen spinning through the perspex windows. Available in natural finish aluminium with black pulley skin only. Fits the following models: XB12R/S XB9R/XB12R XB9SX XB12SS XB12X XB12SS T | |
|
|
|
 | | |
|
|
 | | | Rizoma XB12 Billet Aluminium Rear Pully. | €259,91 - Add to cart | | CNC machined billet aluminium construction, anodised in black. 65 tooth replacement billet aluminium rear pulley to fit all XB12 Models (will also fit XB9 models fitted with updated XB12 belt and pulleys). | |
|
|
