|
|
13 products found. Go to page:
| | |  | | | Buell XB9S and XB12S Quick Throttle kit | €179,00 - Add to cart | | Complete quick throttle kit Fit's on all Buell XB12S and Buell XB9S from 2004-2010
Billet aluminim design. 2 screw operation with 3 cams for different degrees. The cable can be adjusted on 3 places.
Delivers quicker acceleration using minimal throttle rotation.
Designed specifically for use on the track or drag strip. Includes anodized 6061 aluminum throttle housing, lightweight Teflon throttle tube and three Teflon throttle rings (40mm, 42mm and 44mm) ... | |
| | |  | | | Buell XB9R and XB12R and 1125R Quick Throttle kit | €179,00 - Add to cart | | Complete quick throttle kit Fit's on all Buell XB12R and Buell XB9R from 2004-2010, and Buell 1125R
Billet aluminim design. 2 screw operation with 3 cams for different degrees. The cable can be adjusted on 3 places.
Delivers quicker acceleration using minimal throttle rotation.
Designed specifically for use on the track or drag strip. Includes anodized 6061 aluminum throttle housing, lightweight Teflon throttle tube and three Teflon throttle rings (40mm... | |
| | |  | | | Black Buell XB 9/12 exhaust 02-07 Torque Hammer | €800,00 - Add to cart | | Black Torque Hammer exhaust for all Buell XB9 and XB12 from 2002-2007. ( 03-10 US models )
They are made from RVS (stainless steel) with seperate mounting brackets.Coated ceramic black
IT WILL HAVE THE MOST HP and TORQUE (WITH A GOOD TUNED ECM), COMPARED TO ANY OTHER EXHAUST PRODUCT YOU CAN BUY FOR YOUR BUELL.
Here is the article of the Torque Hammer tuning: | |
| | |  | | | Black Buell XB 9/12 exhaust 08-10 Torque Hammer | €800,00 - Add to cart | | Finally The BLACKCERAMICCOATED Torque Hammer exhaust for the 2008-2010 models Buell XB is available to fit with the stock headers.
The main reason we developed this, because a lot of cuctomers cannot swap the stock headers for bigger ones but can fit a slip-on.
We still recommend the setup with the Bigger XB12 Headers for better engine breathing.
Also this setup combined with our tune Rides great.
Our latest model comes with db-killer, and separate b... | |
| | |  | | | XB9-12 stage 1 kit 2008 - 2010 stock header | €900,00 - Add to cart | | Twin Motorcycles stage 1 kit for EUROPEAN BUELL XB MODELS WITH SMALL stock headers.
Our stage 1 kit for the XB12 makes between 92 and 96 HP and between 104 and 110NM of
Our stage 1 kit for the XB9 makes between80 HP and between 85 and 90NM of Torque.
The 2010 modles make a little less HP.
This kit is made because a lot of international customers wants to buy a complete kit, that guarantee a 200% good running Buell with the use of the stock headers.
Th... | |
| | |  | | | RedLine Complete fuel system cleaner | €8,30 - Add to cart | | We Higly recommand after testing on our own engines to use Red Line Complete fuel system cleaner every 4000 KM.It cleans deposits on intake valves and combustion chambers, and lubricates the upper cylinder.
Concentrated, high-temp detergents clean your carburetors or fuel injectors, fuel lines, tank, intake valves, combustion chambers, fouled plugs
Improves fuel economy, throttle response, hesitation and stalling
Compatible with both pump gas and race f... | |
| | |  | | | Buell 1125R and 1125 CR Intake stacks | €98,00 - Add to cart | | Twin Motorcycles Buell 1125 High Performance intake stacks. We achieve 144.2 HP and 121 NMof Torque SAECorrected on a stock 1125CR with:
Twin Motorcycles Intake stack
K&N filter
TwinMotorcycles fuel map on a stock ECM
Stock exhaust with CAT
Look below in this articlefor more info
and here you can find the mounting instruction
One of the products we achieved a good price performance result within HP and Torque are our Intake stacks.
We higly re... | |
| | |  | | | | |  | | | Buell XB complete stage 1 kit for 03-07 models | €900,00 - Add to cart | | Buell XB complete stage 1 kit for Buell XB9 and Buell XB12models.
Our stage1 kit makes 96 HP and 109 NM of Torque on a XB12. We made this kitbecause a lot of customers want to buy and exhaust, filter and ECM upgrade.
These are the parts that comes with it:
- TM Torque Hammer Exhaust
- K&N filter
-Reprogrammed ECM, (when you ship us yours we send it back with the parts. Then you only need to do a TPS reset. You can also add aStock ECM with the orde... | |
| | |  | | | Stage 1 Buell XB9/12 2008-2010 ECM | €750,00 - Add to cart | | When you already have a Exhaust (we hope you buy our Torque Hammer for the Buell XB 9-12 and K&N Air filter for your Buell XB9/12 2008-2009-2010 model, and you only want too have a good running Bike, Buy this ECM with our fuel and ignition map inside. I tested this ECM with all the big exhaust manufacturers, and with all size of headers on it in our dyno room, before we released this product. It makes your bike run so smooth and strong. I made a new ig... | |
| | |  | | | XB9-12 stage 1 kit 2008 - 2010 Big header | €1.217,20 - Add to cart | | Our stage 1kitfor theXB12models 2008-2010 makes between 94 and 98.2 HP and between 104 and 108NM of Torque.
Our stage 1 kit for the XB9 makes between80 HP and between 85 and 90NM of Torque.
This complete kit is for the Buell XB 2008, 2009 and 2010 models only.
This kit is made because a lot of international customers wants to buy a complete kit, that guarantee a 200% good runningBuell.
These are the parts that comes with it:
- 2 exhaust gaskets
- TM ... | |
| | |  | | | Buell XB and XR1200 Barnett Clutch kit | €153,36 - Add to cart | | High Performance clutch kit for all Buell XB models and all XR1200 models. Perfect upgrade for hard street riding, race use and dragrace use.
Barnett, Clutch plate kit ( 8 friction plates , 7 steel plates ) Barnett clutch plates and steel plates have been made from the finest materials available. Through research and development, we are constantly striving to offer the best possible friction material for your motorcycle or ATV.
Barnett tempered steel dri... | |
| |
|
|
| | | | | | | | | |
|---|
|
