|
|
| |  | | | | |  | | | Buell, Fuel regulator | €53,95 - Add to cart | | Buell, Fuel regulator
for Buell models;
THUNDERBOLT S3(T) - 2000-2002
FIREBOLT XB12R - 2004-2009
FIREBOLT XB9R - 2003-2007
LIGHTNING XB12Scg - 2005-2009
LIGHTNING XB12Ss - 2006-2009
LIGHTNING XB9SX - 2005-2009
LIGHTNING XBSTT - 2007-2008
LIGHTNING X1 - 1999-2002
LIGHTNING XB12S - 2004-2008
LIGHTNING XB9S - 2003-2004
ULYSSES XB12X - 2006-2009
ULYSSES XB12XT - 2008-2009
ULYSSES XB12XP - 2009 | |
| | |  | | | | |  | | | BLACK XB9-12 stage 1 kit 2008 - 2010 stock header | €1.080,00 - Add to cart | | Twin Motorcycles BLACKVERSIONstage 1 kit for EUROPEAN BUELL XB MODELS WITH SMALL stock headers.
Our stage 1 kit for the XB12 makes between 92 and 96 HP and between 104 and 110 NM of
Our stage 1 kit for the XB9 makes between 80 HP and between 85 and 90 NM of Torque.
The 2010 modles make a little less HP.
This kit is made because a lot of international customers wants to buy a complete kit, that guarantee a 200% good running Buell with the use of the sto... | |
| | |  | | | XB9-12 stage 1 kit 2008 - 2010 stock header | €900,00 - Add to cart | | Twin Motorcycles stage 1 kit for EUROPEAN BUELL XB MODELS WITH SMALL stock headers.
Our stage 1 kit for the XB12 makes between 92 and 96 HP and between 104 and 110NM of
Our stage 1 kit for the XB9 makes between80 HP and between 85 and 90NM of Torque.
The 2010 modles make a little less HP.
This kit is made because a lot of international customers wants to buy a complete kit, that guarantee a 200% good running Buell with the use of the stock headers.
Th... | |
| | |  | | | | |  | | | TM ECM Reflash all models | €300,00 - Add to cart | | We offer the service to reprogram the stock Buell ECM without going to the dyno. After4 years of every day dynowork we know it is possible and we have the products too do it. The most customers have a stock setup and problems with a not smooth running bike, and a bike who is getting really hot because of the lean conditions. We have more then 50 combinations of Fuel maps available for all models. - The old Tuber all years - XB9 till 2009 - XB12 till 2010 -... | |
| | |  | | | Buell, ECM XB core all models 2003-2007 | €466,35 - Add to cart | | Buell, ECM XB core all models 2003-2007 !! needs to be flased for the right configuration !! by a Harley Dealer
we can do this for you, please contact us for this
replacement for;
N0326.02A8
N0326.02A8A
N0326.1AA | |
| | |  | | | Stage 1 Buell XB9/12 2008-2010 ECM | €750,00 - Add to cart | | When you already have a Exhaust (we hope you buy our Torque Hammer for the Buell XB 9-12 and K&N Air filter for your Buell XB9/12 2008-2009-2010 model, and you only want too have a good running Bike, Buy this ECM with our fuel and ignition map inside. I tested this ECM with all the big exhaust manufacturers, and with all size of headers on it in our dyno room, before we released this product. It makes your bike run so smooth and strong. I made a new ig... | |
| | |  | | | Stage 1 Buell 1125R and 1125CR ECM | €750,00 - Add to cart | | When you already have a Exhaust (we hope you buy our Torque Hammer for the 1125) and Air filter for your Buell 1125R or 1125CR, and you only want too have a good running Bike, Buy this ECM with, our fuel and ignition map inside. I tested this ECM with all the big exhaust manufacturers, mounted on our test bike in our dyno room, before we released this product. It makes your bike run so smooth and strong. I made a new ignition and fuel map for this setup an... | |
| | |  | | | XB9-12 stage 1 kit 2008 - 2010 Big header | €1.217,20 - Add to cart | | Our stage 1kitfor theXB12models 2008-2010 makes between 94 and 98.2 HP and between 104 and 108NM of Torque.
Our stage 1 kit for the XB9 makes between80 HP and between 85 and 90NM of Torque.
This complete kit is for the Buell XB 2008, 2009 and 2010 models only.
This kit is made because a lot of international customers wants to buy a complete kit, that guarantee a 200% good runningBuell.
These are the parts that comes with it:
- 2 exhaust gaskets
- TM ... | |
| | |  | | | | |  | | | | |  | | | | |  | | | | |  | | | Dyno all Buell XB and 1125, XR1200, Sportster | €650,00 - Add to cart | | The remap of All new XB 2008-2009-2010 and 1125 Models is 1 full day job on the dyno. All the problems with jurking on low RPM, not smooth on the throttle, not delivering the power the engine can make are gone. We give a 100% money back guarantee, if you are not satisfied. Mail us for the possibilities. | |
| | |  | | | Dyno 1125R/CR Race ECM programming | €650,00 - Add to cart | | Our core business is programming the Buell ECM in our Dyno room for our customers. For the 1125R and the 1125CR it’s a must to do this, because the bike is running very lean. We are testing all of the aftermarket exhaust and setups for the Buell 1125 and make new fuel maps for the 1125. We now offer the service to reprogram the Buell Race ECM for Racers worldwide. You have to send us the ECM, we will install this setup in our dyno room a... | |
| | |  | | | Twin Motorcycles USB programming cable | €32,00 - Add to cart | | Twin MotorcyclesUSB programming cable forDiagnose your Buell or program the ECM on the Dyno.
This cable is to diagnose with softwareyour Buell ECM, or for use on the Dyno when programming the ECM. The cable will work on all BuellXB and 1125 stock ECM's.
The cable has a lenght of is 1,8 meter. Download the right USB driver, http://www.ftdichip.com/Drivers/VCP.htm | |
| | |  | | | Buell TPS Sensor for all Buell models till 2006 | €118,15 - Add to cart | | Original Buell TPS, Throttle Position Sensor, fits all Buell XB9 and XB12 models from1999 till2006.
For 2007 model look here:P0279.3AA
- old tube models till 2002
- all XB models till 2006
up to modelyear 2006. part number 29537-99Y
For the older tube models we recommand to change these every 6 years. Also the head temperature sensor in the rear cylinder.
We find a lot of problems in the wrong values beeing send to the ECM on the dyno. | |
| | |  | | | Dyno Buell ECM all models until 2007 | €650,00 - Add to cart | | We remap all Buell Models on the DYNO. We do this for all kind of setups: Different header size Different slip-ons (exhaust systems) Different airbox setups. The price is for remapping your ECM, (original or Race ECM) double check of the Fuell map on our Dyno and a nice dynograph with A/F and horsepower. You have to bring your bike to our shop and make a dyno appointment.
Be aware that we skipped a lot of exhaust manufacturers from our website because of ... | |
| |
|
|
| | | | | | | | | |
|---|
| | | | Buell XB9/12 M2,S1,S3,X1 Cylinder valve seat
€ 8,03 | | Buell XB9/12 Cylinder valve seat
€ 8,03 | | Buell XB9/12 M2,S1,S3,X1 Cylinder valve seat
€ 8,03 | | Buell M2,S3,X1 rocker arms pushrod tube cover
€ 25,63 | | Buell M2,S1,S2,S3,X1 Rocker arm push rod cover
€ 27,63 | | | Show 30 new products | | |
|---|
| | | | | |
|---|
|
